Challenger 15K Heavy-Duty 2-Post 2-Stage Front & Rear Arms #E15
Couldn't load pickup availability
Meets the highest safety standards set by the Automotive Lift Institute.
Quick Specs
| Model / Part Number | E15 |
| Capacity | 15,000 lbs |
| ALI/ETL Certified | ✓ Yes |
| Lift Type | Heavy-duty clearfloor 2-post |
| Arm Configuration | 2-stage front / 2-stage rear |
| Lifting Configuration | Symmetric |
| Rise Height | 77.75" (6' 5.75") |
| Ceiling Height Required | 14' 7" / 16' 7" |
| Overall Height | 14' 6" / 16' 6" |
| Overall Width | 12' 3 1/16" |
| Drive-Thru Clearance | 9' 1 3/8" |
| Arm Reach | 36.5" min / 55" max |
| Motor / Voltage | 2 HP, 208-230V, 1-phase |
| Rise Time | 75 seconds |
| Colors | Blue or red |
| Installation | Available — call (817) 865-3707 |
The Challenger E15 is the step-up 2-post lift for shops that have outgrown 10K and 12K equipment but still want an efficient clearfloor bay. With 15,000 lb capacity, symmetric loading, heavy-duty 2-stage arms, and ALI/ETL certification, it is built for commercial truck, van, SUV, and mixed-fleet service where ordinary light-duty lifts run out of margin.
15K Heavy-Duty Symmetric Lifting
The E15 is rated for 15,000 lbs, with capacity distributed across four arms. That puts it in the right lane for heavier pickups, commercial vans, fleet vehicles, and high-profile service work that a 10K lift should not be asked to handle. If your bays see both passenger vehicles and work trucks, this model gives your technicians more room to choose the safer lift for the job.
2-Stage Front & Rear Arm Reach
Heavy-duty 2-stage front and rear arms give the E15 a 36.5" to 55" reach range. That matters on long-wheelbase trucks and vans where lift points sit farther out than they do on compact cars. The symmetric layout keeps the vehicle centered between the columns, while the arm reach helps cover the different lift point patterns that roll into a commercial bay.
Adjustable Column Height For Taller Vehicles
The E15 can be configured at 14' 6" or 16' 6" overall height, with required ceiling height of 14' 7" or 16' 7". The taller setup gives more overhead room for high-profile vehicles, while the lower configuration keeps the lift usable in shops that cannot spare a full 17-foot bay. Measure the lowest obstruction before ordering; Alamo can help confirm fit before the lift ships.
Jacketed Single-Point Lock Release
The jacketed pulley-less single-point mechanical lock release lets the technician release both columns from one side of the lift. On a heavy-duty 2-post, that is not just convenience — it reduces walking around the vehicle and keeps the lowering routine consistent across the bay.
Built For Commercial Shop Abuse
The E15 brings the details that matter after year one: a padded overhead shutoff system, powder coat finish, plated arm restraints and arm pins, heavy-duty polyurethane screw pads, and integrated rubber door guards. A shop buying from a box-drop retailer gets a pallet. A shop buying from Alamo gets a partner — we sell it, install it, service it, and inspect it. Call (817) 865-3707.
Frequently Asked Questions
Is the Challenger E15 ALI certified?
Yes. The Challenger E15 is ALI/ETL certified and uses the ALI Gold Label badge for certified lift identification.
What is the lifting capacity?
15,000 lbs total capacity, based on the load being properly distributed across all four arms.
What ceiling height is required?
14' 7" in the lower configuration or 16' 7" in the taller configuration. Measure the lowest obstruction before ordering.
What vehicles is the E15 best for?
Heavier pickups, work vans, fleet vehicles, SUVs, and mixed commercial bays where 10K or 12K lifts do not provide enough capacity margin.
Does the E15 include stack adapters?
Yes. Stack adapters come standard, and screw pad height runs from 5.25" to 6.75".
What electrical service does it need?
2 HP motor, 208-230V, single-phase power. Have a qualified electrician verify the circuit during installation planning.
How fast does it rise?
Listed rise time is 75 seconds. Actual speed can vary with vehicle weight and operating conditions.
Does Alamo install the E15?
Yes. Alamo can help with bay fit, installation planning, service, and inspections. Call (817) 865-3707.
Best For
✓ Commercial truck and fleet service bays
✓ Heavier pickups, cargo vans, SUVs, and work trucks
✓ Shops that need more capacity margin than a 10K or 12K 2-post
✓ Facilities with 14' 7"+ ceiling height available
✓ Buyers who need ALI/ETL certification for commercial use
✗ Not ideal for low-ceiling bays under 14' 7"
✗ Not ideal if most work is compact/passenger-car only and bay height is limited
Installation Requirements
• Ceiling height: 14' 7" minimum for lower setup / 16' 7" for taller setup
• Recommended bay: plan around a heavy-duty 15K bay, with room for tall vehicles and door swing
• Concrete: verify slab thickness, reinforcement, PSI, condition, and local code before installation
• Electrical: 208-230V, single-phase service for the 2 HP motor
• Professional installation strongly recommended because this is a heavy-duty 15K lift
• Alamo offers installation planning and support — call (817) 865-3707
Why Buy This Challenger E15 From Alamo Equipment
✓ Alamo can help confirm whether the E15's 15,000 lb capacity, 2-stage arms, and required ceiling height fit the shop's truck and fleet work
✓ Heavy-duty 2-post planning matters: Alamo can review bay height, slab condition, electrical, delivery access, and installation timing before the lift arrives
✓ The E15 is a better fit than a 10K or 12K lift when the buyer needs more capacity margin for work trucks, vans, and mixed commercial service
✓ Alamo supports Challenger lift buyers with installation planning, annual inspections, maintenance, and repair after the sale
✓ Buyers can compare the E15 against Alamo-sold 15K alternatives like the Atlas PV15PX without leaving the catalog
✓ Free shipping to the 48 contiguous states unless noted otherwise
(817) 865-3707
Challenger E15 vs Atlas PV15PX
Both are Alamo-sold 15,000 lb clearfloor 2-post lifts for heavier service work. The Challenger E15 is the premium ALI/ETL-certified choice with symmetric 2-stage arms and Challenger support. The Atlas PV15PX is the value-focused 15K alternative with extra-tall/extra-wide positioning, symmetric arms, and multiple height settings.
| Spec | Challenger E15 | Atlas PV15PX |
|---|---|---|
| Capacity | 15,000 lbs | 15,000 lbs |
| Certification / Positioning | ALI/ETL certified premium Challenger 15K lift | Commercial-grade Atlas 15K value alternative |
| Arm Design | Symmetric 2-stage front/rear arms | Symmetric arms |
| Rise / Lift Height | 77.75" rise height | 81" max lift height with adapters |
| Overall Height | 14' 6" / 16' 6" | 165" or 177"; 150" low-height setup with extra cables |
| Best Fit | Commercial bays prioritizing Challenger support, ALI/ETL certification, and service backup | Shops wanting an Alamo-sold 15K value alternative with extra width and adjustable height |
Choose the E15 for premium Challenger certification and Alamo installation/service backup. Choose the Atlas PV15PX when the buyer wants an in-catalog 15K value alternative with extra-tall/extra-wide flexibility.
Free shipping: Orders ship free to the 48 contiguous states.
Real lift support: Alamo can help with model selection, bay fit, installation planning, maintenance, inspections, and service after the sale.
Commercial shop focus: This is not a generic pallet drop. You are buying from a team that works with automotive shop equipment every day.
Questions before you order? Call (817) 865-3707.
Shipping Information:
Customers may pick up their lift at the nearest freight terminal at no additional cost.
You will need to provide your own trailer. Terminal staff will safely load the lift onto your trailer. The RECEIVER/CUSTOMER is solely responsible for properly securing the load for transport.
To schedule a pickup, contact us at info@alamoequipment.com or
(817) 865-3707. Please include the lift model and your zip code so we can direct you to the appropriate terminal.
Challenger Warranty
Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.
This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.
This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.
The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson. Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.
Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.
Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ www.challengerlifts.com/register-your-lift