FS-Curtis CA10 120G 10HP Ultra Pack, Horiz Simplex Air Comp #CA10-HUP
Couldn't load pickup availability
| Model / Part Number | CA10-HUP |
| Horsepower | 10 HP |
| Tank | 120 Gallon Horizontal ASME |
| Airflow | 34.2 CFM @ 175 PSI |
| Pressure Range | 175 PSI |
| Warranty | 12 months |
FS-Curtis CA10-HUP — 10 HP Air Compressor
A shop that's had a job come back because moisture in the air line fouled a paint job doesn't want to risk that again after stepping up to 10 HP — the factory dryer and auto-drain need to scale up with the rest of the system.
The FS-Curtis CA10-HUP is a two-stage reciprocating, ultra pack compressor rated for 10 HP with a 120 gallon horizontal ASME tank, built for multi-bay shops and commercial operations that need compressed air on tap all day. The included Ultra Pack — factory-installed automatic tank drain and refrigerated air dryer — cuts down on the maintenance routine so your team spends less time babysitting the compressor and more time on paying work.
Who the CA10-HUP Is Built For
- ✅ A paint or finishing shop stepping up to 10 HP that's already lost a job to moisture in the air line and needs the refrigerated dryer scaled up with the rest of the system
- ✅ A shop with limited overhead clearance wanting 10 HP output with factory-installed air-quality accessories included from day one
- ✅ An owner replacing an aging compressor who wants to consolidate two separate upgrades (more CFM, plus factory accessories) into one purchase
- ✅ A multi-bay shop running several air tools at once where consistent, moisture-free air pressure directly affects job quality, not just tool performance
- ✅ A shop standardizing on FS-Curtis's Ultra Pack tier across locations so every unit has the same accessory bundle and maintenance routine
What the CA10-HUP Is NOT Built For
- ❌ Budget-conscious buyers who don't need the extra accessories yet — the base CA10-H saves real money
- ❌ Single-bay or home garage use — a smaller unit is more cost-effective
- ❌ Three-phase-only electrical — no single-phase option at this HP tier
What Makes the CA10-HUP Different
Commercial 2-Stage Pump
The CA10-HUP uses an E71, Cast-Iron, Two-Stage, 3-Cylinder pump built for daily, all-day duty cycles — not a hobby-grade single-stage unit that struggles under continuous shop use.
CFM & Pressure Output
Delivers 34.2 CFM @ 175 PSI and holds pressure up to 175 PSI, enough headroom to run impact wrenches, tire equipment, and paint tools without the tank running dry.
Ultra Pack Upgrades
Includes factory-installed automatic tank drain and refrigerated air dryer — upgrades that reduce maintenance and extend the life of the tank and pump versus a base-model compressor.
Power Requirements
Three-Phase, 230V/460V options available. Confirm your panel and breaker sizing with an electrician before delivery.
- Factory air-quality accessories at 10 HP
- Low-clearance installs
- Paint/finishing shops
- Budget-first buyers
- Shops needing single-phase power
CA10-HUP vs. FS-Curtis CA10-H (10 HP Horizontal, No Ultra Pack) — Which Compressor Is Right for Your Shop?
| Decision Point | CA10-HUP | FS-Curtis CA10-H (10 HP Horizontal, No Ultra Pack) |
|---|---|---|
| Horsepower / Tank | 10 HP / 120 Gal Horizontal | 10 HP / 120 Gal Horizontal |
| CFM @ 175 PSI | 34.2 CFM | 34.2 CFM |
| Included accessories | Ultra Pack bundle (auto-drain/dryer per FS-Curtis config) | Standard configuration, no bundled accessories |
| Best fit | Shops wanting factory air-quality accessories included | Budget-first buyers who don't need the accessory bundle yet |
Choose the CA10-HUP for factory-installed air-quality accessories bundled with 10 HP output. Choose the CA10-H for a lower-cost base configuration if you don't need the Ultra Pack accessories yet. Both stay inside Alamo’s catalog — call (817) 865-3707.
Full Specifications — CA10-HUP
| Model / Part Number | CA10-HUP |
| Horsepower | 10 HP |
| Pump | E71, Cast-Iron, Two-Stage, 3-Cylinder |
| Configuration | Two-Stage Reciprocating, Ultra Pack |
| Tank | 120 Gallon Horizontal ASME |
| Airflow | 34.2 CFM @ 175 PSI |
| Pressure Range | 175 PSI |
| Motor / Electrical | Three-Phase, 230V/460V options available |
| Phase / Hz / Voltage |
Three Phase: 3/60/200-208V (FCA10E71H1U-D9L1XX) |
| Ultra Pack Features | factory-installed automatic tank drain and refrigerated air dryer |
| Overall Dimensions | 74" L x 37" W x 54" H |
| Shipping Weight | 1,026 lbs |
| Warranty | 12 months |
⚠️ Setup Requirements
- Electrical: Three-Phase, 230V/460V options available; have an electrician confirm your panel capacity before delivery.
- Floor space: 74" L x 37" W x 54" H footprint; plan clear access on at least two sides for maintenance and tank drain.
- Ventilation: Locate in a dry, ventilated area away from dust and moisture to protect the pump and tank.
- Weight: 1,026 lbs shipping weight — confirm your floor/dock can receive and position the unit.
- Setup: Installation is available as a quoted service (piping, electrical tie-in, functional test) — it’s not included in the purchase price. Call (817) 865-3707 for an install quote if you’d like Alamo’s crew to set it up.
FS-Curtis Warranty — CA10-HUP
FS-Curtis backs the CA10-HUP with a 1-year parts-only warranty.
| Component | Coverage Term |
|---|---|
| Tank & pump | 1 year parts |
| Motor & electrical components | 1 year parts |
| Ultra Pack accessories (auto tank drain, refrigerated air dryer) | 1 year parts |
| Wear items (belts, filters, gaskets) | Not covered (consumable) |
Warranty service is through Alamo Equipment & Service — call (817) 865-3707 instead of waiting on a manufacturer hotline. Coverage is subject to FS-Curtis warranty terms, conditions, and requirements.
Frequently Asked Questions — FS-Curtis CA10-HUP
Why Buy the CA10-HUP from Alamo Equipment & Service?
- Installation available. Buying online gets you the compressor — piping and electrical tie-in are an extra-charge service. We have the crews to install it and can quote that separately; call (817) 865-3707 for a quote.
- We service it. These compressors need preventative maintenance up to 4x a year per the manufacturer — oil changes, belt and air filter checks, contactor and electrical inspection. Call (817) 865-3707 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 10 HP, 120 Gallon Horizontal ASME tank, 34.2 CFM @ 175 PSI — we’ll confirm this matches your shop’s actual air draw before you order.
- Free shipping. Ships free to the 48 contiguous states.
- Expert comparison help. Not sure if the CA10-HUP or the FS-Curtis CA10-H (10 HP Horizontal, No Ultra Pack) is the better fit? We’ll walk you through it.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Ships by freight. Add to cart and enter your ZIP for a freight quote, or call us.
See the attached document for FS CURTIS WARRANTY