FS-Curtis CA5 5HP 80G, Ultra Pack, Vertical Simplex Air Comp #CA5-VUP
Couldn't load pickup availability
FS-Curtis Shipping
Equipment and Parts: Free Shipping
| Model / Part Number | CA5-VUP |
| Horsepower | 5 HP |
| Tank | 80 Gallon Vertical ASME |
| Airflow | 17.4 CFM @ 175 PSI |
| Pressure Range | 175 PSI |
| Warranty | 12 months |
FS-Curtis CA5-VUP — 5 HP Air Compressor
A shop that's tired of manually draining tank condensation every night, or dealing with wet air fouling paint jobs, needs the accessories built in from the factory instead of bolted on later as an afterthought.
The FS-Curtis CA5-VUP is a two-stage reciprocating, ultra pack compressor rated for 5 HP with an 80 gallon vertical ASME tank, built for multi-bay shops and commercial operations that need compressed air on tap all day. The included Ultra Pack — factory-installed automatic tank drain and refrigerated air dryer — cuts down on the maintenance routine so your team spends less time babysitting the compressor and more time on paying work.
Who the CA5-VUP Is Built For
- ✅ A body shop or paint booth operator who's watched moisture in the air line show up as fisheye defects in a clear coat and needs the refrigerated dryer built in, not bolted on as an afterthought
- ✅ A one-tech or two-tech shop where nobody's reliably remembering to open the tank drain valve every night, and rust has already started showing up inside an older tank from sitting wet
- ✅ A shop owner who's calculated that retrofitting an auto-drain and dryer onto a base unit later costs more in labor and downtime than paying for the Ultra Pack up front
- ✅ An operation replacing a worn single-stage compressor that wants to skip the mid-tier upgrade path entirely and land on a fully-equipped two-stage setup in one purchase
- ✅ A shop with a narrow bay or tight wall space where the vertical tank's smaller floor footprint matters as much as the accessory bundle itself
What the CA5-VUP Is NOT Built For
- ❌ Budget-conscious buyers who don't need the extra accessories yet — the base CA5-V saves real money
- ❌ Shops needing more than roughly 17-18 CFM continuous — look at the CA7.5 or a duplex unit instead
- ❌ Home garages doing occasional weekend work
What Makes the CA5-VUP Different
Commercial 2-Stage Pump
The CA5-VUP uses an E50, Cast-Iron, Two-Stage pump built for daily, all-day duty cycles — not a hobby-grade single-stage unit that struggles under continuous shop use.
CFM & Pressure Output
Delivers 17.4 CFM @ 175 PSI and holds pressure up to 175 PSI, enough headroom to run impact wrenches, tire equipment, and paint tools without the tank running dry.
Ultra Pack Upgrades
Includes factory-installed automatic tank drain and refrigerated air dryer — upgrades that reduce maintenance and extend the life of the tank and pump versus a base-model compressor.
Power Requirements
Single or Three-Phase, 230V/460V options available. Confirm your panel and breaker sizing with an electrician before delivery.
- Factory-installed air-quality accessories
- Paint/finishing shops
- No manual tank-drain hassle
- Budget-first buyers
- Shops needing 25+ CFM
CA5-VUP vs. Atlas AF7 (5 HP, 80 Gal Vertical, w/ Magnetic Starter) — Which Compressor Is Right for Your Shop?
| Decision Point | CA5-VUP | Atlas AF7 (5 HP, 80 Gal Vertical, w/ Magnetic Starter) |
|---|---|---|
| Horsepower / Tank | 5 HP / 80 Gal Vertical | 5 HP / 80 Gal Vertical |
| CFM @ 175 PSI | 17.4 CFM | 14.5 CFM @ 175 PSI |
| Included accessories | Ultra Pack bundle (auto-drain/dryer per FS-Curtis config) | Magnetic starter included |
| Best fit | Shops wanting factory air-quality accessories bundled in | Shops wanting the starter included without the full accessory bundle |
Choose the CA5-VUP when factory-installed air-quality accessories matter for your work (like paint/finishing). Choose the Atlas AF7 for a simpler, lower-cost package that still includes the magnetic starter. Both stay inside Alamo’s catalog — call (844) 480-6059.
Full Specifications — CA5-VUP
| Model / Part Number | CA5-VUP |
| Horsepower | 5 HP |
| Pump | E50, Cast-Iron, Two-Stage |
| Configuration | Two-Stage Reciprocating, Ultra Pack |
| Tank | 80 Gallon Vertical ASME |
| Airflow | 17.4 CFM @ 175 PSI |
| Pressure Range | 175 PSI |
| Motor / Electrical | Single or Three-Phase, 230V/460V options available |
| Phase / Hz / Voltage |
Single Phase: 1/60/230V (FCA05E50V8U-A2L1XX) Three Phase: 3/60/200-208V (FCA05E50V8U-A9L1XX) 3/60/230V (FCA05E50V8U-A3L1XX) 3/60/460V (FCA05E50V8U-A4L1XX) |
| Ultra Pack Features | factory-installed automatic tank drain and refrigerated air dryer |
| Overall Dimensions | 39" L x 37" W x 77" H |
| Shipping Weight | 600 lbs |
| Warranty | 12 months |
⚠️ Setup Requirements
- Electrical: Single or Three-Phase, 230V/460V options available; have an electrician confirm your panel capacity before delivery.
- Floor space: 39" L x 37" W x 77" H footprint; plan clear access on at least two sides for maintenance and tank drain.
- Ventilation: Locate in a dry, ventilated area away from dust and moisture to protect the pump and tank.
- Weight: 600 lbs shipping weight — confirm your floor/dock can receive and position the unit.
- Setup: Installation is available as a quoted service (piping, electrical tie-in, functional test) — it’s not included in the purchase price. Call (844) 480-6059 for an install quote if you’d like Alamo’s crew to set it up.
FS-Curtis Warranty — CA5-VUP
FS-Curtis backs the CA5-VUP with a 1-year parts-only warranty.
| Component | Coverage Term |
|---|---|
| Tank & pump | 1 year parts |
| Motor & electrical components | 1 year parts |
| Ultra Pack accessories (auto tank drain, refrigerated air dryer) | 1 year parts |
| Wear items (belts, filters, gaskets) | Not covered (consumable) |
Warranty service is through Alamo Equipment & Service — call (844) 480-6059 instead of waiting on a manufacturer hotline. Coverage is subject to FS-Curtis warranty terms, conditions, and requirements.
Frequently Asked Questions — FS-Curtis CA5-VUP
Why Buy the CA5-VUP from Alamo Equipment & Service?
- Installation available. Buying online gets you the compressor — piping and electrical tie-in are an extra-charge service. We have the crews to install it and can quote that separately; call (844) 480-6059 for a quote.
- We service it. These compressors need preventative maintenance up to 4x a year per the manufacturer — oil changes, belt and air filter checks, contactor and electrical inspection. Call (844) 480-6059 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 5 HP, 80 Gallon Vertical ASME tank, 17.4 CFM @ 175 PSI — we’ll confirm this matches your shop’s actual air draw before you order.
- Free shipping. Ships free to the 48 contiguous states.
- Expert comparison help. Not sure if the CA5-VUP or the Atlas AF7 (5 HP, 80 Gal Vertical, w/ Magnetic Starter) is the better fit? We’ll walk you through it.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Shipping Rates and Delivery Estimates: Shipping is FREE to the 48 contiguous United States.
Shipment Processing Time: All orders are processed within [2–3] business days of receipt, excluding weekends and holidays. Orders are not processed or shipped from Friday at 12 pm CST through Sunday or on holidays. During periods of high order volume, shipments may be delayed by a few days. Customers will be notified via email or phone in the event of significant delays.
See the attached document for FS CURTIS WARRANTY