FS-Curtis CC.75 30G Duplex 0.75HP(2) Climate Control Air Comp #CC.75-D
Couldn't load pickup availability
FS-Curtis Shipping
Equipment and Parts: Free Shipping
| Model / Part Number | CC.75 Duplex |
| Horsepower | 0.75 HP (x2, Duplex) |
| Tank | 30 Gallon Horizontal ASME |
| Airflow | 2.1 CFM (x2) @ 80 PSI |
| Pressure Range | 80 PSI |
| Warranty | 12 months |
FS-Curtis CC.75-D — 0.75 HP (x2, Duplex) Air Compressor
A hospital or critical-facility engineer can't have the pneumatic control system for patient-room dampers go down because a single compressor failed — they need a second pump ready to take over automatically, not a maintenance ticket and a cold room.
The FS-Curtis CC.75-D is a duplex, climate control compressor rated for 0.75 HP (x2, Duplex) with a 30 gallon horizontal ASME tank, built for shops and commercial operations that need compressed air on tap all day without paying for accessories they don’t need.
Who the CC.75-D Is Built For
- ✅ A hospital, laboratory, or critical facility where the pneumatic control system can't go down — a second independent pump means one unit can be serviced while the other keeps the building's controls running
- ✅ A building engineer who's had a single-pump controls compressor fail and leave zones without proper thermostat/damper control until it was fixed
- ✅ A larger facility with more pneumatic devices on one control loop than a simplex unit can reliably support without redundancy
- ✅ A facility manager standardizing on FS-Curtis's Climate Control line for uptime-critical mechanical rooms
- ✅ An operation planning ahead for facility expansion where a duplex setup now avoids replacing a simplex unit later
What the CC.75-D Is NOT Built For
- ❌ Small buildings or single mechanical rooms where a simplex CC.75-H already covers the pneumatic-control load
- ❌ Automotive or general repair shops — this line is for controls/instrumentation air, not shop-air tools
- ❌ Budget-conscious buyers — duplex costs meaningfully more than simplex at the same HP
What Makes the CC.75-D Different
Single-Stage Pump, Built for Continuous Duty
The FS-Curtis CC.75-D uses an ES06 (x2) pump — a reliable single-stage design sized for the steady, low-pressure control-air demand of pneumatic thermostats and actuators, built to run continuously without the wear a smaller hobby-grade pump would see under the same duty cycle.
CFM & Pressure Output
Delivers 2.1 CFM (x2) @ 80 PSI and holds pressure up to 80 PSI, enough headroom to supply reliable air to pneumatic thermostats, damper actuators, and control instrumentation without the tank running dry.
Power Requirements
Single or Three-Phase, 115V/230V/460V options available. Confirm your panel and breaker sizing with an electrician before delivery.
- Built-in pump redundancy
- Critical-facility controls air
- Zero-downtime mechanical rooms
- Small buildings / single rooms
- Budget-first buyers
CC.75-D vs. FS-Curtis CC.75-H (0.75 HP, Simplex) — Which Compressor Is Right for Your Shop?
| Decision Point | CC.75-D | FS-Curtis CC.75-H (0.75 HP, Simplex) |
|---|---|---|
| Horsepower / Tank | 0.75 HP x2 / 30 Gal Horizontal | 0.75 HP / 30 Gal Horizontal |
| CFM @ 80 PSI | 2.1 CFM x2 (4.2 CFM combined) | 2.1 CFM |
| Redundancy | Duplex — two independent pumps, built-in backup | Simplex — single pump, no built-in redundancy |
| Best fit | Critical facilities needing uptime insurance | Smaller buildings where redundancy isn't required |
Choose the CC.75-D when the pneumatic control system can't tolerate downtime. Choose the CC.75-H for a simpler, lower-cost setup if redundancy isn't a hard requirement. Both stay inside Alamo’s catalog — call (844) 480-6059.
Full Specifications — CC.75-D
| Model / Part Number | CC.75 Duplex |
| Horsepower | 0.75 HP (x2, Duplex) |
| Pump | ES06 (x2) |
| Configuration | Duplex, Climate Control |
| Tank | 30 Gallon Horizontal ASME |
| Airflow | 2.1 CFM (x2) @ 80 PSI |
| Pressure Range | 80 PSI |
| Motor / Electrical | Single or Three-Phase, 115V/230V/460V options available |
| Phase / Hz / Voltage |
Single Phase: 1/60/115V (FCC34S06D3S-A1F1XX) 1/60/230V (FCC34S06D3S-A2F1XX) Three Phase: 3/60/200V (FCC34S06D3S-A9F1XX) 3/60/230V (FCC34S06D3S-A3F1XX) 3/60/460V (FCC34S06D3S-A4F1XX) |
| Overall Dimensions | 20" L x 42" W x 32" H |
| Shipping Weight | 255 lbs |
| Warranty | 12 months |
⚠️ Setup Requirements
- Electrical: Single or Three-Phase, 115V/230V/460V options available; have an electrician confirm your panel capacity before delivery.
- Floor space: 20" L x 42" W x 32" H footprint; plan clear access on at least two sides for maintenance and tank drain.
- Ventilation: Locate in a dry, ventilated area away from dust and moisture to protect the pump and tank.
- Weight: 255 lbs shipping weight — confirm your floor/dock can receive and position the unit.
- Setup: Installation is available as a quoted service (piping, electrical tie-in, functional test) — it’s not included in the purchase price. Call (844) 480-6059 for an install quote if you’d like Alamo’s crew to set it up.
FS-Curtis Warranty — CC.75-D
FS-Curtis backs the CC.75-D with a 1-year parts-only warranty.
| Component | Coverage Term |
|---|---|
| Tank & pump | 1 year parts |
| Motor & electrical components | 1 year parts |
| Wear items (belts, filters, gaskets) | Not covered (consumable) |
Warranty service is through Alamo Equipment & Service — call (844) 480-6059 instead of waiting on a manufacturer hotline. Coverage is subject to FS-Curtis warranty terms, conditions, and requirements.
Frequently Asked Questions — FS-Curtis CC.75-D
Why Buy the CC.75-D from Alamo Equipment & Service?
- Installation available. Buying online gets you the compressor — piping and electrical tie-in are an extra-charge service. We have the crews to install it and can quote that separately; call (844) 480-6059 for a quote.
- We service it. These compressors need preventative maintenance up to 4x a year per the manufacturer — oil changes, belt and air filter checks, contactor and electrical inspection. Call (844) 480-6059 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 0.75 HP (x2, Duplex), a 30 gallon horizontal ASME tank, 2.1 CFM (x2) @ 80 PSI — we’ll confirm this matches your shop’s actual air draw before you order.
- Free shipping. Ships free to the 48 contiguous states.
- Expert comparison help. Not sure if the CC.75-D or the FS-Curtis CC.75-H (0.75 HP, Simplex) is the better fit? We’ll walk you through it.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Shipping Rates and Delivery Estimates: Shipping is FREE to the 48 contiguous United States.
Shipment Processing Time: All orders are processed within [2–3] business days of receipt, excluding weekends and holidays. Orders are not processed or shipped from Friday at 12 pm CST through Sunday or on holidays. During periods of high order volume, shipments may be delayed by a few days. Customers will be notified via email or phone in the event of significant delays.
See the attached document for FS CURTIS WARRANTY