FS-Curtis CC3 60G Horiz 3HP Simplex Climate Cont Air Comp #CC3-H

FS-Curtis CC3-H — 3 HP Air Compressor

A large office complex or school building has dozens of pneumatic zone thermostats pulling air at once, and a smaller compressor from this line just can't keep the whole system pressurized through a hot afternoon.

The FS-Curtis CC3-H is a simplex, climate control compressor rated for 3 HP with a 60 gallon horizontal ASME tank, built for shops and commercial operations that need compressed air on tap all day without paying for accessories they don’t need.

Who the CC3-H Is Built For

• ✅ A large office complex, school, or multi-floor building with dozens of pneumatic zone thermostats and VAV actuators pulling air simultaneously
• ✅ A controls contractor stepping up from the CC1.5 tier because the building's pneumatic-control system has genuinely outgrown 3.5 CFM of sustained output
• ✅ A facility with a mechanical room that can accommodate a 60-gallon tank and wants meaningful CFM headroom without moving to duplex redundancy
• ✅ A building engineer replacing an aging or undersized compressor that's started struggling to maintain pressure across an expanded BAS system
• ✅ A light-commercial or institutional facility needing higher-volume instrumentation air without the tool-air demands of a shop compressor

What the CC3-H Is NOT Built For

• ❌ Smaller buildings with fewer pneumatic devices — the CC.75 or CC1.5 tier saves real money if 7.5 CFM isn't needed
• ❌ Automotive or general repair shops — this line is for controls/instrumentation air, not shop-air tools
• ❌ Critical facilities needing redundancy — no duplex CC3 configuration is offered; consider the CC5-D or CC7.5-D instead

What Makes the CC3-H Different

Single-Stage Pump, Built for Continuous Duty

The FS-Curtis CC3-H uses an ES30 pump — a reliable single-stage design sized for the steady, low-pressure control-air demand of pneumatic thermostats and actuators, built to run continuously without the wear a smaller hobby-grade pump would see under the same duty cycle.

CFM & Pressure Output

Delivers 7.5 CFM @ 80 PSI and holds pressure up to 80 PSI, enough headroom to supply reliable air to pneumatic thermostats, damper actuators, and control instrumentation without the tank running dry.

Power Requirements

Single or Three-Phase, 230V/460V options available. Confirm your panel and breaker sizing with an electrician before delivery.

Full Specifications — CC3-H

FS-Curtis Warranty — CC3-H

FS-Curtis backs the CC3-H with a 1-year parts-only warranty.

Warranty service is through Alamo Equipment & Service — call (817) 865-3707 instead of waiting on a manufacturer hotline. Coverage is subject to FS-Curtis warranty terms, conditions, and requirements.