FS-Curtis CC5 80G Horiz 5HP Simplex Climate Cont Air Comp #CC5-H
Couldn't load pickup availability
FS-Curtis Shipping
Equipment and Parts: Free Shipping
| Model / Part Number | CC5 Simplex |
| Horsepower | 5 HP |
| Tank | 80 Gallon Horizontal ASME |
| Airflow | 15.2 CFM @ 80 PSI |
| Pressure Range | 80 PSI |
| Warranty | 12 months |
FS-Curtis CC5-H — 5 HP Air Compressor
A large institutional campus with a central pneumatic-control system running across multiple buildings needs one compressor with serious CFM headroom, not several smaller units scattered around trying to keep up.
The FS-Curtis CC5-H is a simplex, climate control compressor rated for 5 HP with an 80 gallon horizontal ASME tank, built for shops and commercial operations that need compressed air on tap all day without paying for accessories they don’t need.
Who the CC5-H Is Built For
- ✅ A large institutional campus, hospital complex, or multi-building facility running a centralized pneumatic-control system across a wide footprint
- ✅ A controls contractor consolidating several smaller, aging compressors into one higher-capacity unit for easier maintenance and monitoring
- ✅ A facility with a large mechanical room that can accommodate an 80-gallon tank and wants the highest simplex CFM in this line
- ✅ A building engineer whose pneumatic system has grown well past what the CC3 tier can sustain
- ✅ An institutional or large commercial facility needing high-volume instrumentation air without the redundancy of a duplex configuration
What the CC5-H Is NOT Built For
- ❌ Smaller or mid-size buildings — the CC1.5 or CC3 tier is a better fit and costs meaningfully less
- ❌ Automotive or general repair shops — this line is for controls/instrumentation air, not shop-air tools
- ❌ Critical facilities needing built-in redundancy — look at the CC5-D duplex instead
What Makes the CC5-H Different
Single-Stage Pump, Built for Continuous Duty
The FS-Curtis CC5-H uses an ES50 pump — a reliable single-stage design sized for the steady, low-pressure control-air demand of pneumatic thermostats and actuators, built to run continuously without the wear a smaller hobby-grade pump would see under the same duty cycle.
CFM & Pressure Output
Delivers 15.2 CFM @ 80 PSI and holds pressure up to 80 PSI, enough headroom to supply reliable air to pneumatic thermostats, damper actuators, and control instrumentation without the tank running dry.
Power Requirements
Single or Three-Phase, 230V/460V options available. Confirm your panel and breaker sizing with an electrician before delivery.
- 15.2 CFM — highest simplex CC tier
- Campus-scale / multi-building systems
- Consolidates multiple smaller units
- Smaller / mid-size buildings
- Facilities needing redundancy
CC5-H vs. FS-Curtis CC3-H (3 HP, Simplex) — Which Compressor Is Right for Your Shop?
| Decision Point | CC5-H | FS-Curtis CC3-H (3 HP, Simplex) |
|---|---|---|
| Horsepower / Tank | 5 HP / 80 Gal Horizontal | 3 HP / 60 Gal Horizontal |
| CFM @ 80 PSI | 15.2 CFM | 7.5 CFM |
| Use case | Very large or multi-building pneumatic-control systems | Large single buildings with many zones |
| Best fit | Campus-scale or centralized control systems | Large buildings that haven't outgrown the CC3 tier |
Choose the CC5-H for campus-scale or centralized pneumatic-control systems needing the highest simplex CFM in this line. Choose the CC3-H if your building's system fits comfortably within 7.5 CFM — it costs less and takes less space. Both stay inside Alamo’s catalog — call (844) 480-6059.
Full Specifications — CC5-H
| Model / Part Number | CC5 Simplex |
| Horsepower | 5 HP |
| Pump | ES50 |
| Configuration | Simplex, Climate Control |
| Tank | 80 Gallon Horizontal ASME |
| Airflow | 15.2 CFM @ 80 PSI |
| Pressure Range | 80 PSI |
| Motor / Electrical | Single or Three-Phase, 230V/460V options available |
| Phase / Hz / Voltage |
Single Phase: 1/60/230V (FCC05S50H8S-A2F1XX) Three Phase: 3/60/200V (FCC05S50H8S-A9F1XX) 3/60/230V (FCC05S50H8S-A3F1XX) 3/60/460V (FCC05S50H8S-A4F1XX) |
| Overall Dimensions | 21" L x 67" W x 44" H |
| Shipping Weight | 485 lbs |
| Warranty | 12 months |
⚠️ Setup Requirements
- Electrical: Single or Three-Phase, 230V/460V options available; have an electrician confirm your panel capacity before delivery.
- Floor space: 21" L x 67" W x 44" H footprint; plan clear access on at least two sides for maintenance and tank drain.
- Ventilation: Locate in a dry, ventilated area away from dust and moisture to protect the pump and tank.
- Weight: 485 lbs shipping weight — confirm your floor/dock can receive and position the unit.
- Setup: Installation is available as a quoted service (piping, electrical tie-in, functional test) — it’s not included in the purchase price. Call (844) 480-6059 for an install quote if you’d like Alamo’s crew to set it up.
FS-Curtis Warranty — CC5-H
FS-Curtis backs the CC5-H with a 1-year parts-only warranty.
| Component | Coverage Term |
|---|---|
| Tank & pump | 1 year parts |
| Motor & electrical components | 1 year parts |
| Wear items (belts, filters, gaskets) | Not covered (consumable) |
Warranty service is through Alamo Equipment & Service — call (844) 480-6059 instead of waiting on a manufacturer hotline. Coverage is subject to FS-Curtis warranty terms, conditions, and requirements.
Frequently Asked Questions — FS-Curtis CC5-H
Why Buy the CC5-H from Alamo Equipment & Service?
- Installation available. Buying online gets you the compressor — piping and electrical tie-in are an extra-charge service. We have the crews to install it and can quote that separately; call (844) 480-6059 for a quote.
- We service it. These compressors need preventative maintenance up to 4x a year per the manufacturer — oil changes, belt and air filter checks, contactor and electrical inspection. Call (844) 480-6059 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 5 HP, an 80 gallon horizontal ASME tank, 15.2 CFM @ 80 PSI — we’ll confirm this matches your shop’s actual air draw before you order.
- Free shipping. Ships free to the 48 contiguous states.
- Expert comparison help. Not sure if the CC5-H or the FS-Curtis CC3-H (3 HP, Simplex) is the better fit? We’ll walk you through it.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Shipping Rates and Delivery Estimates: Shipping is FREE to the 48 contiguous United States.
Shipment Processing Time: All orders are processed within [2–3] business days of receipt, excluding weekends and holidays. Orders are not processed or shipped from Friday at 12 pm CST through Sunday or on holidays. During periods of high order volume, shipments may be delayed by a few days. Customers will be notified via email or phone in the event of significant delays.
See the attached document for FS CURTIS WARRANTY