FS-Curtis CT10 120G Horizontal 10HP Two-Stage Simplex Air Comp #CT10-H
Shipping information
Enter your delivery ZIP code to see priced freight options for this item. Rates match checkout exactly.
FS Curtis shipping quote
Shipping is quoted by destination before payment. Select your options, then request your freight quote.
We will confirm the shipping total before sending a payment link.
Couldn't load pickup availability
| Model / Part Number | CT10 Simplex 2-Stage |
| Horsepower | 10 HP |
| Tank | 120 Gallon Horizontal ASME |
| Airflow | 29.7 CFM @ 175 PSI |
| Pressure Range | 175 PSI |
| Warranty | 12 months |
FS-Curtis CT10-H — 10 HP Air Compressor
A shop with 575V three-phase service that's outgrown 7.5 HP output gets a genuine step up on the CT platform — a horizontal, low-clearance tank at 10 HP with a voltage option the CA10 line doesn't offer.
The FS-Curtis CT10-H is a two-stage reciprocating compressor rated for 10 HP with a 120 gallon horizontal ASME tank, built for shops and commercial operations that need compressed air on tap all day without paying for accessories they don’t need.
Who the CT10-H Is Built For
- ✅ A shop with 575V three-phase electrical service that's outgrown 7.5 HP output and needs 10 HP headroom — the CA10 line doesn't offer 575V
- ✅ A shop with limited overhead clearance wanting 10 HP output in a low-profile horizontal tank
- ✅ Multi-bay commercial shops running several air tools simultaneously that need genuine 10 HP continuous output
- ✅ A shop standardizing on FS-Curtis's CT line for its distinct C75 pump platform and broader voltage range
- ✅ An owner who's watched a smaller unit's tank run dry faster than it recovers on busy days and wants to eliminate that bottleneck
What the CT10-H Is NOT Built For
- ❌ Home garages or single-bay use — a 5 or 7.5 HP unit is more cost-effective for lighter demand
- ❌ Shops needing built-in redundancy — no duplex CT10 configuration exists; consider a duplex CA10 unit instead
- ❌ Buyers wanting factory auto-drain/dryer accessories standard — not available in this configuration
What Makes the CT10-H Different
Commercial 2-Stage Pump
The CT10-H uses a C75, Cast-Iron, Two-Stage pump built for daily, all-day duty cycles — not a hobby-grade single-stage unit that struggles under continuous shop use.
CFM & Pressure Output
Delivers 29.7 CFM @ 175 PSI and holds pressure up to 175 PSI, enough headroom to run impact wrenches, tire equipment, and paint tools without the tank running dry.
Power Requirements
Three-Phase, 230V/460V/575V options available. Confirm your panel and breaker sizing with an electrician before delivery.
- 575V three-phase available
- 10 HP in a low-clearance tank
- Multi-bay continuous demand
- Home garages / occasional use
- Shops needing duplex redundancy
CT10-H vs. FS-Curtis CA10-H (10 HP, CA Line) — Which Compressor Is Right for Your Shop?
| Decision Point | CT10-H | FS-Curtis CA10-H (10 HP, CA Line) |
|---|---|---|
| Horsepower / Tank | 10 HP / 120 Gal Horizontal | 10 HP / 120 Gal Horizontal |
| CFM @ 175 PSI | 29.7 CFM | 34.2 CFM |
| Voltage options | Three-Phase 200-208V/230V/460V/575V | Three-Phase 200-208V/230V/460V (no 575V) |
| Best fit | Shops with 575V three-phase service available | Shops wanting the highest CFM at this HP tier |
Choose the CT10-H specifically if your shop runs 575V three-phase power. Choose the CA10-H if your electrical service is standard 200-460V and you want slightly higher CFM output (34.2 vs. 29.7) at the same HP. Both stay inside Alamo’s catalog — call (817) 865-3707.
Full Specifications — CT10-H
| Model / Part Number | CT10 Simplex 2-Stage |
| Horsepower | 10 HP |
| Pump | C75, Cast-Iron, Two-Stage |
| Configuration | Two-Stage Reciprocating |
| Tank | 120 Gallon Horizontal ASME |
| Airflow | 29.7 CFM @ 175 PSI |
| Pressure Range | 175 PSI |
| Motor / Electrical | Three-Phase, 230V/460V/575V options available |
| Phase / Hz / Voltage |
Three Phase: 3/60/200-208V (FCT10C75H1S-A9L1XX) |
| Overall Dimensions | 74" L x 25" W x 53" H |
| Shipping Weight | 833 lbs |
| Warranty | 12 months |
⚠️ Setup Requirements
- Electrical: Three-Phase, 230V/460V/575V options available; have an electrician confirm your panel capacity before delivery.
- Floor space: 74" L x 25" W x 53" H footprint; plan clear access on at least two sides for maintenance and tank drain.
- Ventilation: Locate in a dry, ventilated area away from dust and moisture to protect the pump and tank.
- Weight: 833 lbs shipping weight — confirm your floor/dock can receive and position the unit.
- Setup: Installation is available as a quoted service (piping, electrical tie-in, functional test) — it’s not included in the purchase price. Call (817) 865-3707 for an install quote if you’d like Alamo’s crew to set it up.
FS-Curtis Warranty — CT10-H
FS-Curtis backs the CT10-H with a 1-year parts-only warranty.
| Component | Coverage Term |
|---|---|
| Tank & pump | 1 year parts |
| Motor & electrical components | 1 year parts |
| Wear items (belts, filters, gaskets) | Not covered (consumable) |
Warranty service is through Alamo Equipment & Service — call (817) 865-3707 instead of waiting on a manufacturer hotline. Coverage is subject to FS-Curtis warranty terms, conditions, and requirements.
Frequently Asked Questions — FS-Curtis CT10-H
Why Buy the CT10-H from Alamo Equipment & Service?
- Installation available. Buying online gets you the compressor — piping and electrical tie-in are an extra-charge service. We have the crews to install it and can quote that separately; call (817) 865-3707 for a quote.
- We service it. These compressors need preventative maintenance up to 4x a year per the manufacturer — oil changes, belt and air filter checks, contactor and electrical inspection. Call (817) 865-3707 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 10 HP, 120 Gallon Horizontal ASME tank, 29.7 CFM @ 175 PSI — we’ll confirm this matches your shop’s actual air draw before you order.
- Ships by freight. Add to cart and enter your ZIP for a freight quote, or call us.
- Expert comparison help. Not sure if the CT10-H or the FS-Curtis CA10-H (10 HP, CA Line) is the better fit? We’ll walk you through it.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Your LTL freight rate is calculated at checkout. Each order may contain one lift or other freight-shipped item. Please order parts and additional freight items separately.
See the attached document for FS CURTIS WARRANTY