FS-Curtis ML30 200G Horiz 30HP Simplex Tank Elec Air Comp #ML30-SH
Couldn't load pickup availability
FS-Curtis Shipping
Shipping is included in the listed price for eligible FS-Curtis destinations. Product-specific exclusions or accessorial charges will be confirmed before shipment.
| Model / Part Number | ML30 Simplex |
| Horsepower | 30 HP |
| Tank | 200 Gallon Horizontal ASME |
| Airflow | 102.2 CFM @ 175 PSI |
| Pressure Range | 175 PSI |
| Warranty | 12 months |
FS-Curtis ML30-SH — 30 HP Air Compressor
A large industrial plant running the heaviest pneumatic tooling on-site has pushed a 25 HP compressor past its ceiling, and the plant manager wants the highest single-pump CFM FS-Curtis makes — the facility's own maintenance crew already covers what accessories would otherwise handle.
The FS-Curtis ML30-SH is a two-stage reciprocating compressor rated for 30 HP with a 200 gallon horizontal ASME tank, built to deliver reliable, all-day compressed air for shops and commercial operations at a straightforward entry price.
Who the ML30-SH Is Built For
- ✅ A large industrial or manufacturing facility that's outgrown a 25 HP compressor and needs the highest single-pump CFM output FS-Curtis offers
- ✅ An operation with an existing air dryer or filtration system already installed, not needing factory-bundled accessories
- ✅ A facility wanting the lower entry price of a base configuration with the option to add accessories later if demand changes
- ✅ A plant replacing an aging compressor that's started struggling under the heaviest multi-tool load in the facility
- ✅ A facility standardizing on FS-Curtis's ML Series for parts and service commonality, starting at the base 30 HP tier
What the ML30-SH Is NOT Built For
- ❌ Facilities whose demand is fully covered by a 20-25 HP unit — the ML20/ML25 line saves real money if 65-82 CFM is enough
- ❌ Shops wanting factory auto-drain/dryer accessories standard — the Ultra Pack (ML30-HUP) adds those, this base unit doesn't
- ❌ Facilities needing 120V/240V single-phase power — this unit is three-phase only
What Makes the ML30-SH Different
Commercial 2-Stage Pump
The ML30-SH uses a C98, Cast-Iron, Two-Stage pump built for daily, all-day duty cycles — not a hobby-grade single-stage unit that struggles under continuous shop use.
CFM & Pressure Output
Sustains 102.2 CFM @ 175 PSI at up to 175 PSI, built with enough capacity to run impact wrenches, tire equipment, and paint tools through a full shift without the tank draining down.
Power Requirements
Three-Phase only, 230V/460V options available. Confirm your panel and breaker sizing with an electrician before delivery.
- 102.2 CFM — highest simplex ML output
- Lower entry price, no bundled accessories
- Large industrial facilities
- Facilities covered by 20-25 HP
- Single-phase-only electrical
ML30-SH vs. FS-Curtis ML30-HUP (30 HP, Ultra Pack) — Which Compressor Is Right for Your Shop?
| Decision Point | ML30-SH | FS-Curtis ML30-HUP (30 HP, Ultra Pack) |
|---|---|---|
| Horsepower / Tank | 30 HP / 200 Gal Horizontal | 30 HP / 200 Gal Horizontal |
| CFM @ 175 PSI | 102.2 CFM | 102.2 CFM |
| Included accessories | Standard configuration, no bundled accessories | Ultra Pack bundle (auto-drain/dryer) |
| Best fit | Facilities wanting the highest single-pump CFM at a lower entry price | Facilities wanting factory air-quality accessories included |
Choose the ML30-SH for the same 102.2 CFM output at a lower entry price if you don't need bundled accessories. Choose the ML30-HUP if factory-installed air-quality accessories matter more than saving on the upfront price. Both stay inside Alamo’s catalog — call (844) 480-6059.
Full Specifications — ML30-SH
| Model / Part Number | ML30 Simplex |
| Horsepower | 30 HP |
| Pump | C98, Cast-Iron, Two-Stage |
| Configuration | Two-Stage Reciprocating |
| Tank | 200 Gallon Horizontal ASME |
| Airflow | 102.2 CFM @ 175 PSI |
| Pressure Range | 175 PSI |
| Motor / Electrical | Three-Phase only, 230V/460V options available |
| Phase / Hz / Voltage |
Three Phase: 3/60/200-208V (FML30C98H2S-A9L1XX) |
| Overall Dimensions | 78" L x 43" W x 76" H |
| Shipping Weight | 2350 lbs |
| Warranty | 12 months |
⚠️ Setup Requirements
- Electrical: Three-Phase only, 230V/460V options available; have an electrician confirm your panel capacity before delivery.
- Floor space: 78" L x 43" W x 76" H footprint; plan clear access on at least two sides for maintenance and tank drain.
- Ventilation: Locate in a dry, ventilated area away from dust and moisture to protect the pump and tank.
- Weight: 2350 lbs shipping weight — confirm your floor/dock can receive and position the unit.
- Setup: Installation is available as a quoted service (piping, electrical tie-in, functional test) — it’s not included in the purchase price. Call (844) 480-6059 for an install quote if you’d like Alamo’s crew to set it up.
FS-Curtis Warranty — ML30-SH
FS-Curtis backs the ML30-SH with a 1-year parts-only warranty.
| Component | Coverage Term |
|---|---|
| Tank & pump | 1 year parts |
| Motor & electrical components | 1 year parts |
| Wear items (belts, filters, gaskets) | Not covered (consumable) |
Warranty service is through Alamo Equipment & Service — call (844) 480-6059 instead of waiting on a manufacturer hotline. Coverage is subject to FS-Curtis warranty terms, conditions, and requirements.
Frequently Asked Questions — FS-Curtis ML30-SH
Why Buy the ML30-SH from Alamo Equipment & Service?
- Installation available. Buying online gets you the compressor — piping and electrical tie-in are an extra-charge service. We have the crews to install it and can quote that separately; call (844) 480-6059 for a quote.
- We service it. These compressors need preventative maintenance up to 4x a year per the manufacturer — oil changes, belt and air filter checks, contactor and electrical inspection. Call (844) 480-6059 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 30 HP, a 200 gallon horizontal ASME tank, 102.2 CFM @ 175 PSI — we’ll confirm this matches your shop’s actual air draw before you order.
- Free shipping. Ships free to the 48 contiguous states.
- Expert comparison help. Not sure if the ML30-SH or the FS-Curtis ML30-HUP (30 HP, Ultra Pack) is the better fit? We’ll walk you through it.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Shipping included: Shipping is included in the listed price for eligible FS-Curtis destinations. Product-specific exclusions, lead times, or accessorial charges will be confirmed before shipment.
See the attached document for FS CURTIS WARRANTY