FS-Curtis ML30 200G Horiz 30HP Simplex Ultra Pack Air Comp #ML30-HUP
Couldn't load pickup availability
| Model / Part Number | ML30 Ultra Pack Simplex |
| Horsepower | 30 HP |
| Tank | 200 Gallon Horizontal ASME |
| Airflow | 102.2 CFM @ 175 PSI |
| Pressure Range | 175 PSI |
| Warranty | 12 months |
FS-Curtis ML30-HUP — 30 HP Air Compressor
A batch of coated parts got scrapped last quarter when moisture in the compressed air fouled the finish mid-run, and the plant manager traced it straight back to a tank that only gets manually drained when someone remembers.
The FS-Curtis ML30-HUP is a two-stage reciprocating, ultra pack compressor rated for 30 HP with a 200 gallon horizontal ASME tank, built for multi-bay shops and commercial operations that need compressed air on tap all day. The included Ultra Pack — factory-installed automatic tank drain and refrigerated air dryer — keeps the compressor running clean without manual intervention, which matters most on the days your shop is too busy to remember.
Who the ML30-HUP Is Built For
- ✅ A plant manager running the single busiest line in the facility had a production run scrapped last year when moisture in the compressed air fouled a coating process, and isn't gambling on that happening again at 102 CFM of continuous output
- ✅ A maintenance supervisor who's been manually draining a 200-gallon tank on this line every shift for years finally got budget approval to automate it, freeing up a tech's time for actual preventive maintenance instead
- ✅ A facility engineer who ran the cost of one moisture-related production stoppage against the price gap between the base ML30-SH and this Ultra Pack version, and the math wasn't close
- ✅ A plant that outgrew its 25 HP compressor during a capacity expansion needed both the higher-HP tier and the accessories bundled in to avoid a second capital request within the same budget cycle
- ✅ A facility running three overlapping shifts on the plant's single busiest air line chose the top simplex Ultra Pack tier specifically because that line has zero tolerance for an unplanned air-quality issue
What the ML30-HUP Is NOT Built For
- ❌ Facilities whose demand is fully covered by a 20-25 HP unit — the ML20/ML25 line saves real money
- ❌ Budget-conscious buyers who don't need the extra accessories yet — the base ML30-SH saves money
- ❌ Facilities needing 120V/240V single-phase power — this unit is three-phase only
What Makes the ML30-HUP Different
Commercial 2-Stage Pump
The ML30-HUP uses a C98, Cast-Iron, Two-Stage pump built for daily, all-day duty cycles — not a hobby-grade single-stage unit that struggles under continuous shop use.
CFM & Pressure Output
Delivers 102.2 CFM @ 175 PSI and holds pressure up to 175 PSI, enough headroom to run impact wrenches, tire equipment, and paint tools without the tank running dry.
Ultra Pack Upgrades
Includes factory-installed automatic tank drain and refrigerated air dryer — upgrades that reduce maintenance and extend the life of the tank and pump versus a base-model compressor.
Power Requirements
Three-Phase only, 230V/460V options available. Confirm your panel and breaker sizing with an electrician before delivery.
- Factory air-quality accessories
- 102.2 CFM — highest simplex ML output
- Large industrial facilities
- Facilities covered by 20-25 HP
- Single-phase-only electrical
ML30-HUP vs. FS-Curtis ML30-SH (no accessories) — Which Compressor Is Right for Your Shop?
| Decision Point | ML30-HUP | FS-Curtis ML30-SH (no accessories) |
|---|---|---|
| Horsepower / Tank | 30 HP / 200 Gal Horizontal | 30 HP / 200 Gal Horizontal |
| CFM @ 175 PSI | 102.2 CFM | 102.2 CFM |
| Included accessories | Ultra Pack bundle (auto-drain/dryer) | Standard configuration, no bundled accessories |
| Best fit | Facilities wanting factory air-quality accessories | Budget-conscious facilities that don't need accessories yet |
Choose the ML30-HUP for factory-installed air-quality accessories at the highest simplex ML tier. Choose the ML30-SH for a lower-cost simplex setup if you don't need the Ultra Pack accessories. Both stay inside Alamo’s catalog — call (817) 865-3707.
Full Specifications — ML30-HUP
| Model / Part Number | ML30 Ultra Pack Simplex |
| Horsepower | 30 HP |
| Pump | C98, Cast-Iron, Two-Stage |
| Configuration | Two-Stage Reciprocating, Ultra Pack |
| Tank | 200 Gallon Horizontal ASME |
| Airflow | 102.2 CFM @ 175 PSI |
| Pressure Range | 175 PSI |
| Motor / Electrical | Three-Phase only, 230V/460V options available |
| Phase / Hz / Voltage |
Three Phase: 3/60/200-208V (FML30C98H2U-D9L1XX) |
| Ultra Pack Features | factory-installed automatic tank drain and refrigerated air dryer |
| Overall Dimensions | 78" L x 43" W x 76" H |
| Shipping Weight | 2350 lbs |
| Warranty | 12 months |
⚠️ Setup Requirements
- Electrical: Three-Phase only, 230V/460V options available; have an electrician confirm your panel capacity before delivery.
- Floor space: 78" L x 43" W x 76" H footprint; plan clear access on at least two sides for maintenance and tank drain.
- Ventilation: Locate in a dry, ventilated area away from dust and moisture to protect the pump and tank.
- Weight: 2350 lbs shipping weight — confirm your floor/dock can receive and position the unit.
- Setup: Installation is available as a quoted service (piping, electrical tie-in, functional test) — it’s not included in the purchase price. Call (817) 865-3707 for an install quote if you’d like Alamo’s crew to set it up.
FS-Curtis Warranty — ML30-HUP
FS-Curtis backs the ML30-HUP with a 1-year parts-only warranty.
| Component | Coverage Term |
|---|---|
| Tank & pump | 1 year parts |
| Motor & electrical components | 1 year parts |
| Ultra Pack accessories (auto tank drain, refrigerated air dryer) | 1 year parts |
| Wear items (belts, filters, gaskets) | Not covered (consumable) |
Warranty service is through Alamo Equipment & Service — call (817) 865-3707 instead of waiting on a manufacturer hotline. Coverage is subject to FS-Curtis warranty terms, conditions, and requirements.
Frequently Asked Questions — FS-Curtis ML30-HUP
Why Buy the ML30-HUP from Alamo Equipment & Service?
- Installation available. Buying online gets you the compressor — piping and electrical tie-in are an extra-charge service. We have the crews to install it and can quote that separately; call (817) 865-3707 for a quote.
- We service it. These compressors need preventative maintenance up to 4x a year per the manufacturer — oil changes, belt and air filter checks, contactor and electrical inspection. Call (817) 865-3707 for maintenance, repairs, or support — and if you ever need warranty work, we register your equipment with the manufacturer and handle the claim directly, so you’re not stuck navigating vendor support on your own.
- We size it with you. 30 HP, a 200 gallon horizontal ASME tank, 102.2 CFM @ 175 PSI — we’ll confirm this matches your shop’s actual air draw before you order.
- Free shipping. Ships free to the 48 contiguous states.
- Expert comparison help. Not sure if the ML30-HUP or the FS-Curtis ML30-SH (no accessories) is the better fit? We’ll walk you through it.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Ships by freight. Add to cart and enter your ZIP for a freight quote, or call us.
See the attached document for FS CURTIS WARRANTY