Hofmann 12K Scissor Alignment Lift — Flush Mount #EELR724APKG

Hofmann 12,000 lb Scissor Alignment Lift — Flush Mount

A surface-mount alignment lift ramp sitting in the middle of your alignment bay is a tripping hazard and a headache for anything low to the ground — sport sedans, lowered trucks, and modern EVs with tight front-splitter clearance all struggle to climb a raised runway without scraping. If your alignment bay also doubles as walkway or storage space between jobs, a permanent above-floor ramp structure is in the way every time you're not actively aligning a vehicle.

The Hofmann EELR724APKG solves both problems by installing flush with your existing floor. The scissor mechanism and runways drop into a pit so the working surface sits level with the rest of the bay — low-clearance vehicles drive straight across with no ramp to clear, and when the lift is down, your bay reads as open floor space instead of a fixed piece of equipment. At 12,000 lbs it's rated for the same passenger cars, SUVs, and light trucks a typical alignment operation runs daily, and the Open Front configuration keeps technician access to the front cross-members and steering components unobstructed during four-wheel alignment work.

Who the EELR724APKG Is Built For

• Shops with a 15' x 25'+ bay that want the alignment lift to disappear into the floor rather than sit as a permanent above-grade obstruction between jobs.
• Operations that regularly align low-clearance vehicles — sport compacts, lowered trucks, splitter-equipped EVs — where a raised runway edge risks scraping the front fascia on approach.
• Dealerships and tire centers running high alignment volume that need the bay to double as walkway or staging space when the lift isn't in use.
• Facilities doing new construction or a full remodel, where a flush-mount pit can be poured into the concrete plan up front rather than retrofitted around a surface unit.
• Shops that need consistent turntable and slip-plate alignment accuracy on every vehicle without ramp-approach variability affecting wheel positioning.
• Fleet and commercial service operations running routine alignment checks where floor-level access speeds up loading trailers, service carts, or wheeled diagnostic equipment through the bay.

What the EELR724APKG Is NOT Built For

Flush-mount installation means a pit — if you're retrofitting an existing slab without the budget or downtime for concrete cutting, a surface-mount design is the more practical starting point. It's also sized for passenger vehicles, SUVs, and light trucks at 12,000 lbs; if you need a 4-post configuration for heavier or more varied fleet work, the APlusLift 11,000 lb 4-Post Alignment Lift is a nearby-capacity alternative in a different lift style.

What Makes the EELR724APKG Different

12,000 lb. Lifting Capacity

The EELR724APKG is rated to 12,000 lbs, which covers the full range of passenger cars, crossovers, SUVs, and light trucks that make up the bulk of alignment work at most shops. That headroom means you're not turning away a 3/4-ton pickup or a loaded fleet van because your alignment lift tops out too early — one machine handles the daily mix instead of routing heavier vehicles to a second bay.

Flush Mount Design

Because the runways and scissor mechanism sit in a pit rather than on top of the slab, the EELR724APKG installs level with the surrounding floor. That means no ramp edge for a tech to catch a cart wheel on, no raised structure eating into walking space between alignments, and a cleaner-looking bay for customers who can see into the shop. It's the single biggest reason to pick this model over a surface-mount unit in the same capacity class.

Open-Front Configuration

With no crossmember blocking the front of the lift, your tech gets a clear approach to the front suspension, steering rack, and cross-members during camber and caster adjustments. On vehicles with tight front-end geometry or aftermarket splitters, that open sightline shortens diagnostic time and reduces the chance of misreading an adjustment point.

ALI Certified Lift

ALI certification means the EELR724APKG has been independently tested against ANSI/ALI ALCTV safety standards — the same benchmark OSHA references during a shop inspection. That's not just a compliance checkbox: it's documentation you can hand your insurance carrier and a safety record your techs can trust every time they drive a vehicle onto the platform.

Retractable Approach Ramps

Low-profile vehicles — sport sedans, lowered trucks, splitter-equipped EVs — are the vehicles most likely to scrape a fixed ramp edge on approach. The EELR724APKG's retractable ramps let you drop the approach angle for these vehicles and retract them out of the way for everything else, so one lift handles both extremes of your daily vehicle mix without a workaround.

• Hydraulic Equalization System: Delivers smooth and level lifting performance
• Integrated Rear Synchronization Bar: Ensures stable vertical movement
• Dual Mechanical Safety Locks: Enhances operational safety

Full Specifications

Hofmann Warranty — EELR724APKG

Hofmann backs the EELR724APKG with the following coverage terms.

Warranty service is through Alamo Equipment & Service. When you buy from us, you're not waiting on a manufacturer's 800 number — you're calling us at (844) 480-6059 and we dispatch a tech. That's the difference between buying from a box shipper and buying from Alamo.