Stratus Floor Plate Open 10k lbs Single Point Manual Release 2-Post #SAE-F10S

Stratus SAE-F10S — 10,000 lbs 2-Post Lift

When price is the deciding factor and a 10,000 lb floor-plate lift is still the requirement, the options get thin fast — most lifts that hit this capacity climb well past $4,000. The Stratus SAE-F10S is the answer: the lowest-priced 10K floor-plate 2-post in Alamo's current Stratus lineup, at $3,503, without cutting the warranty term that comes standard on every other Stratus model in this batch.

The SAE-F10S's floor plate keeps the design straightforward — open-top base plate, single-point manual release, CE-certified structure tested at 115% dynamic and 150% static load capacity. It ships with a single 4-piece truck adapter set (2 3/4" height), a lighter adapter package than its F10P and F10X siblings, reflecting its position as the entry-price model in the family. Stratus backs it with the same 5-year structural, 3-year hydraulic, 2-year electrical warranty as every other lift in the lineup. Call Alamo at (817) 865-3707 to confirm your ceiling clearance before ordering.

Who the SAE-F10S Is Built For

• The budget-first buyer who needs real 10,000 lb capacity and has compared every floor-plate option in this price range — the SAE-F10S is the lowest entry point Alamo carries in the Stratus 10K floor-plate lineup
• Shops with 11-foot-plus ceilings where the SAE-F10S's slightly taller profile (versus its F10P and F10X siblings) isn't a limiting factor
• First-time lift buyers and home garage owners who want a straightforward, no-frills 10K lift and don't need a large truck-adapter package
• Owner-operators who want the full 5-year Stratus structural warranty even on the most affordable model in the lineup — the warranty term is identical across every Stratus 2-post regardless of price
• Shops that already own truck adapters from a previous lift and don't need a large factory-included adapter set

What the SAE-F10S Is NOT Built For

• ❌ Shops with ceilings under 11 feet — the SAE-F10S's 131 7/8" overall height needs slightly more clearance than the SAE-F10P or SAE-F10X
• ❌ Shops requiring ALI/ETL certification — the SAE-F10S is CE certified, not ALI
• ❌ Bays that need a larger factory truck adapter set — the SAE-F10S ships with only 4 adapters at a single height (2 3/4")

Questions about fit or capacity? Call Alamo at (817) 865-3707.

What Makes the SAE-F10S Different

Entry-Price 10,000 lb Floor Plate — $3,503

The SAE-F10S is priced below every other 10K floor-plate lift in this batch — the practical answer for a shop that needs 10,000 lb capacity and has a hard budget ceiling. Capacity and CE-certified construction aren't reduced to hit that price; the adapter package and overall height are the specs that differ from its higher-priced F10P and F10X siblings.

131 7/8" Overall Height — Confirm 11-Foot Minimum Ceiling

The SAE-F10S's floor plate stands slightly taller than its siblings (131 7/8" versus 111–112" on the F10P/F10X) — plan for an 11-foot minimum ceiling rather than the 10-foot minimum that applies to the lower-profile models. For bays where ceiling height is genuinely tight, confirm this measurement against your specific bay before ordering; the F10P or F10X may fit better if your clearance is closer to 10 feet.

Single-Point Manual Release with Top Limiter Switch

The SAE-F10S uses single-point manual release for straightforward lowering operation, with a top limiter switch that stops cylinder travel at the safe working stroke. The structure and hydraulic system carry the same CE certification as every other Stratus lift in this batch — tested at 115% dynamic and 150% static load capacity.

4-Piece Truck Adapter Set — 2 3/4" Height

The SAE-F10S includes a single 4-piece truck adapter set at 2 3/4" height — a lighter adapter package than the 8-piece, two-height sets included with the SAE-F10P and SAE-F10X. For shops with a straightforward passenger-car and light-truck mix, one adapter height is often sufficient; shops needing more height flexibility should compare the F10P's larger adapter package.

Full Stratus 5/3/2-Year Warranty — No Reduction at the Entry Price

Despite being the lowest-priced model in the batch, the SAE-F10S carries the identical 5-year structural, 3-year hydraulic, 2-year electrical warranty as every other Stratus 2-post. Stratus doesn't scale the warranty term down with price on this line. Call (817) 865-3707 and Alamo will provide the manufacturer documentation directly.

Full Specifications — SAE-F10S

Stratus Warranty — SAE-F10S

Stratus backs the SAE-F10S with a 5-year structural components warranty, 3-year hydraulic components warranty, and 2-year electrical parts warranty. This warranty applies to the full Stratus SAE 2-post lineup.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (817) 865-3707 and we handle it.