Stratus X-Wide Asymmetric & Symmetric 10k lbs 2-Post Lift #SAE-C10X

Stratus SAE-C10X — 10,000 lbs 2-Post Lift

Most 2-post lifts force a choice: symmetric arms for centered truck loading, or asymmetric arms for door-open sedan access. A shop that runs both vehicle types all day either owns two lifts or lives with the wrong arm geometry half the time. The Stratus SAE-C10X removes that trade-off — a single 2-in-1 arm system that handles symmetric and asymmetric loading from the same lift, at 10,000 lbs capacity with an extra-wide drive-thru that makes pulling a wide truck or SUV into the bay noticeably easier than a standard-width 2-post.

The SAE-C10X's clear-floor overhead design keeps the space between the columns completely open — no floor cable, no obstruction for a tech working underneath. Direct drive keeps the drive system simple, and the included 4-piece truck adapter set with 4-inch pegs extends the lift's reach for taller vehicles. Stratus backs it with a 5-year structural, 3-year hydraulic, 2-year electrical warranty. Call Alamo at (844) 480-6059 to confirm bay fit before ordering.

Who the SAE-C10X Is Built For

• The shop that runs a genuine mixed fleet — sedans one hour, half-ton trucks the next — and is tired of picking a single arm geometry and living with the compromise on the other vehicle type
• Technicians who prioritize a completely open floor between the columns for alignment work, exhaust jobs, and anything that needs a tech underneath and around the vehicle without an overhead bar or floor cable in the way
• Shops adding a wide-bay 10K lift where the extra few inches of drive-thru clearance is the difference between an easy pull-in and a careful, slow approach every time
• Owner-operators who want 2-in-1 arm flexibility in one lift instead of running a dedicated symmetric lift and a dedicated asymmetric lift side by side
• Value buyers who've compared this against premium ALI-certified 10K platforms and decided the extra certification cost isn't worth it for their shop's compliance needs

What the SAE-C10X Is NOT Built For

• ❌ Shops that require ALI/ETL third-party certification for compliance or insurance documentation — the SAE-C10X is not ALI listed
• ❌ Bays with ceilings under 13 feet — confirm your bay's lowest obstruction before ordering
• ❌ Shops that need a factory-included truck adapter set larger than 4 pieces — the SAE-C10X ships with a 4-piece set

Questions about fit or capacity? Call Alamo at (844) 480-6059.

What Makes the SAE-C10X Different

2-in-1 Symmetric and Asymmetric Arm System

The SAE-C10X's defining feature is arm flexibility — one lift, both loading geometries. Symmetric positioning centers the vehicle for stable truck and SUV lifting; asymmetric positioning offsets the vehicle toward the rear columns for full door-open access on sedans and coupes. Most 10,000 lb 2-post lifts require choosing one geometry at purchase or install; the SAE-C10X gives a shop both without owning two lifts or reconfiguring hardware between jobs.

Extra-Wide Drive-Thru — 112 3/16" Symmetrical

At 112 3/16" symmetrical and 107 11/16" asymmetrical, the SAE-C10X's drive-thru clearance is wider than most 10K 2-post lifts in this price range. For a shop that regularly lifts full-size trucks, dually pickups, or wide SUVs, the extra few inches of clearance is the difference between a straightforward pull-in and a slow, careful approach every time a wide vehicle needs service.

Clear Floor Design — No Obstruction Underneath

The SAE-C10X routes the synchronization system overhead rather than across the floor, leaving the space between the columns completely clear. For alignment checks, exhaust work, and any job where a technician needs to move freely underneath and around the vehicle, a clear floor removes the tripping hazard and workflow interruption that a floor-plate or floor-cable design introduces.

Direct Drive — Fewer Moving Parts in the Lift System

The SAE-C10X's direct-drive cylinders push the carriage directly rather than through a chain-and-pulley intermediary. Fewer moving parts in the drive system means fewer components to inspect, lubricate, and eventually replace across the lift's service life — a meaningful maintenance-cost consideration for a shop running the lift daily.

Stratus 5/3/2-Year Warranty — Structural, Hydraulic, Electrical

Stratus backs the SAE-C10X with a 5-year structural components warranty, 3-year hydraulic components warranty, and 2-year electrical parts warranty. That's a tiered warranty scaled to how each component category actually wears: structural steel lasts longest, hydraulics next, electrical components see the shortest coverage window because they're the most serviceable. Alamo handles warranty service directly — call (844) 480-6059.

Full Specifications — SAE-C10X

Stratus Warranty — SAE-C10X

Stratus backs the SAE-C10X with a 5-year structural components warranty, 3-year hydraulic components warranty, and 2-year electrical parts warranty. This warranty applies to the full Stratus SAE 2-post lineup.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it.