AMGO® 20,000 lb Air Rolling Bridge Jack #RJ-20A

SKU: ALMAMGRJ20A
Regular price $3,375.00
In stock
On backorder

AMGO shipping quote

Shipping is quoted by destination before payment. Select your options, then request your freight quote.

Call (844) 480-6059

We will confirm the shipping total before sending a payment link.

Manuals & Resources
Need installation help? Call Alamo at (844) 480-6059 - we install, service, and inspect every lift we sell.
Quick Specs - AMGO® RJ-20A 20,000 lb Air Rolling Bridge Jack
Model RJ-20A
Lifting Capacity 20,000 lbs
Type Rolling Jack
Power Pneumatic (air) 0.8 MPa
Arm Pads Reach 45 1/4" - 66 1/8"
Min. Height 14 3/16"
Freight quoted per order — call for a shipping rate. Call (844) 480-6059 - Alamo's team will walk you through setup before you order.
Site Prep - What Your Bay Needs Before It Arrives
Have these ready and setup goes smoother. If one is uncertain, call us first.
Concrete / Floor
  • Used on a lift's runways — no separate concrete anchoring
  • Level, load-rated bay floor
Power
  • Shop air source of at least 0.8 MPa
  • Fit an oil-water separator on the air line
Reach
  • Arm pads reach 45 1/4" - 66 1/8"
  • Minimum height 14 3/16"; max lift 31"-32 5/16" (40"-41 5/16" with adapters)
Alamo Sets Up Every Lift We Sell
We deliver it, set it in your bay, and make sure it runs right. One number, one invoice, no chasing contractors.
(844) 480-6059
Talk to Alamo's team

AMGO® RJ-20A 20,000 lb Air Rolling Bridge Jack

The AMGO® RJ-20A is a 20,000 lb pneumatic rolling bridge jack — the heaviest-duty jack in this range. A pneumatic pump raises it from a shop air source of at least 0.8 MPa, with mechanical safety locks holding the load for heavy-truck service.

Arm pads reach from 45 1/4" to 66 1/8", and adapters extend max lift height from 31"-32 5/16" to 40"-41 5/16".

Who It's Built For

  • Heavy-truck and fleet service bays
  • Wheel and suspension work within 20,000 lbs
  • Shops wanting fast air-powered heavy lifting
  • Techs needing a 66 1/8" arm reach
  • Bays servicing medium-duty trucks

What It's NOT Built For

  • Loads above 20,000 lbs
  • Shops with no compressed-air supply
  • Standalone floor lifting without a lift
  • Vehicles wider than the support base
  • Outdoor use

Key Differentiator: 20-ton heavy-truck jack

At 20,000 lbs the RJ-20A handles medium-duty trucks that lighter rolling jacks in this range cannot.

Best For
  • Heavy-truck and fleet bays
Not Ideal For
  • Light passenger-car service

How the RJ-20A Compares - Which AMGO Rolling Jack Fits Your Shop?

Model Capacity Power Overall Width
RJ-20A 20,000 lb Pneumatic 25 1/2"
RJ-10A 10,000 lb Pneumatic 21 3/4"
RJ-8A 8,000 lb Pneumatic 21 3/4"

All models stay inside Alamo's catalog (comparison links go live as siblings publish). Call (844) 480-6059 and we will help you choose before ordering.

Full Specifications – RJ-20A

Brand AMGO® Hydraulics
Model RJ-20A
Part / SKU ALMAMGRJ20A
Lifting Capacity 20,000 lbs
Type Rolling / Bridge Jack
Power Pneumatic (air) 0.8 MPa
Arm Pads Reach 45 1/4" - 66 1/8"
Min. Height 14 3/16"
Air Pressure 0.8 MPa
Shipping Weight 847 lbs

Installation & Setup

  • Placement: Rides on a lift's runways; no floor anchoring
  • Air: At least 0.8 MPa with an oil-water separator on the line
  • Reach: Arm pads 45 1/4" - 66 1/8", minimum height 14 3/16"

AMGO 5-3-2 Limited Warranty – RJ-20A

AMGO Hydraulics stands behind this lift with a strong limited warranty covering defects in materials and workmanship under normal service. Coverage applies across the 48 contiguous states.

Term Component Group What It Covers
5 Years Steel Structure Components Columns, carriages, scissor frames, platforms, arms and structural steel
3 Years Hydraulic Parts Cylinders, oil seals, hoses, bronze bushings, slider blocks and fittings
2 Years Electrical & Cables Electrical components and cables (rubber pads are a wear item and excluded)

Alamo Equipment administers your warranty directly — call (844) 480-6059 and we coordinate parts and claims with AMGO for you.

Coverage excludes consumable wear items such as rubber pads and is voided by loading past the rated capacity or repairs using non-OEM parts. Confirm exact coverage at the time of purchase.

Frequently Asked Questions - RJ-20A

What capacity is the AMGO RJ-20A?

The RJ-20A lifts up to 20,000 lbs.

What air pressure does the RJ-20A need?

A shop air source of at least 0.8 MPa. Fit an oil-water separator on the line to protect the pump.

What is the arm-pad reach on the RJ-20A?

The arm pads adjust from 45 1/4" to 66 1/8" for heavy-truck runways.

Why Buy the RJ-20A from Alamo Equipment & Service?

  • We set it up. Our crew delivers and commissions it in your bay.
  • We service it. Parts and warranty run through our shop, not a hotline.
  • We size it with you. Tell us your vehicles and space; we confirm the fit.
  • Straight answers. We will point you to a better-value model when one exists.
  • Call for Shipping. Freight is quoted per order so you pay the real rate — (844) 480-6059.

A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.

AMGO shipping is quoted by destination before payment. Select your product options and request a freight quote above. We will confirm the shipping total before sending a payment link.