AMGO® 6,000 lb Air Rolling Bridge Jack #J6A

SKU: ALMAMGJ6A
Regular price $1,600.00
In stock
On backorder

AMGO shipping quote

Shipping is quoted by destination before payment. Select your options, then request your freight quote.

Call (844) 480-6059

We will confirm the shipping total before sending a payment link.

Quick Specs - AMGO® J6A 6,000 lb Air Rolling Bridge Jack
Model J6A
Lifting Capacity 6,000 lbs
Type Rolling Jack
Power Pneumatic (air) 0.8 MPa
Arm Pads Reach 33 1/16" - 53 7/16"
Min. Height 8 7/16"
Freight quoted per order — call for a shipping rate. Call (844) 480-6059 - Alamo's team will walk you through setup before you order.
Site Prep - What Your Bay Needs Before It Arrives
Have these ready and setup goes smoother. If one is uncertain, call us first.
Concrete / Floor
  • Used on a lift's runways — no separate concrete anchoring
  • Level, load-rated bay floor
Power
  • Shop air source of at least 0.8 MPa
  • Fit an oil-water separator on the air line
Reach
  • Arm pads reach 33 1/16" - 53 7/16"
  • Minimum height 8 7/16"; max lift 17 3/4" (20 1/4" with adapters)
Alamo Sets Up Every Lift We Sell
We deliver it, set it in your bay, and make sure it runs right. One number, one invoice, no chasing contractors.
(844) 480-6059
Talk to Alamo's team

AMGO® J6A 6,000 lb Air Rolling Bridge Jack

The AMGO® J6A (RJ-6A) is a 6,000 lb pneumatic rolling bridge jack. A pneumatic pump raises the jack from a shop air source of at least 0.8 MPa, so it lifts fast with no hand pumping. Mechanical safety locks hold the load at height.

Its arm pads reach from 33 1/16" to 53 7/16" to span a range of lift runways, and it stacks for compact storage.

Who It's Built For

  • Air-equipped two- and four-post lift bays
  • Wheel, brake and suspension service within 6,000 lbs
  • Shops that want fast air-powered lifting
  • Techs needing adjustable arm reach
  • Bays where stackable storage matters

What It's NOT Built For

  • Loads above 6,000 lbs
  • Shops with no compressed-air supply
  • Standalone floor lifting without a lift
  • Vehicles wider than the support base
  • Outdoor use

Key Differentiator: Air-powered 6-ton rolling jack

A pneumatic pump raises the J6A from shop air, lifting faster than the hand-pump J6H at the same 6,000 lb rating.

Best For
  • Air-equipped shops wanting fast lifting
Not Ideal For
  • Shops with no compressed-air supply

How the J6A Compares - Which AMGO Rolling Jack Fits Your Shop?

Model Capacity Power Overall Width
J6A 6,000 lb Pneumatic 20 1/16"
J6H 6,000 lb Hand pump 20 1/16"
RJ-8A 8,000 lb Pneumatic 21 3/4"

All models stay inside Alamo's catalog (comparison links go live as siblings publish). Call (844) 480-6059 and we will help you choose before ordering.

Full Specifications – J6A

Brand AMGO® Hydraulics
Model J6A
Part / SKU ALMAMGJ6A
Lifting Capacity 6,000 lbs
Type Rolling / Bridge Jack
Power Pneumatic (air) 0.8 MPa
Arm Pads Reach 33 1/16" - 53 7/16"
Min. Height 8 7/16"
Air Pressure 0.8 MPa
Shipping Weight 282 lbs

Installation & Setup

  • Placement: Rides on a lift's runways; no floor anchoring
  • Air: At least 0.8 MPa with an oil-water separator on the line
  • Reach: Arm pads 33 1/16" - 53 7/16", minimum height 8 7/16"

AMGO 5-3-2 Limited Warranty – J6A

AMGO Hydraulics stands behind this lift with a strong limited warranty covering defects in materials and workmanship under normal service. Coverage applies across the 48 contiguous states.

Term Component Group What It Covers
5 Years Steel Structure Components Columns, carriages, scissor frames, platforms, arms and structural steel
3 Years Hydraulic Parts Cylinders, oil seals, hoses, bronze bushings, slider blocks and fittings
2 Years Electrical & Cables Electrical components and cables (rubber pads are a wear item and excluded)

Alamo Equipment administers your warranty directly — call (844) 480-6059 and we coordinate parts and claims with AMGO for you.

Coverage excludes consumable wear items such as rubber pads and is voided by loading past the rated capacity or repairs using non-OEM parts. Confirm exact coverage at the time of purchase.

Frequently Asked Questions - J6A

What capacity is the AMGO J6A?

The J6A (RJ-6A) lifts up to 6,000 lbs.

What air pressure does the J6A need?

A shop air source of at least 0.8 MPa drives its pneumatic pump. Fit an oil-water separator on the line.

What is the arm-pad reach on the J6A?

The arm pads adjust from 33 1/16" to 53 7/16" to span different lift runways.

Why Buy the J6A from Alamo Equipment & Service?

  • We set it up. Our crew delivers and commissions it in your bay.
  • We service it. Parts and warranty run through our shop, not a hotline.
  • We size it with you. Tell us your vehicles and space; we confirm the fit.
  • Straight answers. We will point you to a better-value model when one exists.
  • Call for Shipping. Freight is quoted per order so you pay the real rate — (844) 480-6059.

A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.

AMGO shipping is quoted by destination before payment. Select your product options and request a freight quote above. We will confirm the shipping total before sending a payment link.