Atlas® PRO9000 9K lb. Extra WxHxL 4-Post Lift #ATEXH-PRO9000-FPD

Atlas PRO9000 — 9,000 lbs 4-Post extra-wide/extra-tall/extra-long storage & service lift

A shop's biggest headache with a wide-track SUV or extended-cab truck usually isn't the weight — it's watching the mirrors barely clear the columns, or seeing the tailgate hang off the end of the runway because the lift was sized for a sedan, not the vehicles that actually roll through the bay. Most 9,000 lb 4-post lifts assume a standard-size vehicle and just add capacity; they don't add the width, length, or headroom bigger vehicles actually need.

The Atlas PRO9000 is built the other way around: 9,000 lbs of capacity paired with genuinely larger dimensions throughout — wider columns, a longer runway, and a taller stance — so trucks, SUVs, and long-wheelbase vehicles fit with real clearance instead of a tight squeeze. Call Alamo at (844) 480-6059 to confirm your bay dimensions before you order.

Who the PRO9000 Is Built For

• The truck or SUV owner who tried a standard 4-post lift at a buddy's shop and watched the mirrors clear the columns by an inch — the PRO9000's extra 131 1/2" width gives real side clearance instead of a white-knuckle drive-on every time
• The collector storing an extended-cab or crew-cab long-bed truck where a standard-length runway leaves the tailgate hanging past the approach ramp — PRO9000's extra-long deck keeps the whole vehicle supported and level
• A home garage owner whose current lift makes them duck under the crossbeam every time they walk beneath a stored vehicle — the PRO9000's taller 95 3/4" stance adds real headroom for anyone working or walking underneath
• A shop owner who looked hard at the ALI-certified APEX9 but realized their insurance and local code don't require certification paperwork, and would rather put that budget toward the PRO9000's larger footprint instead
• Someone parking a dually or a wide-track SUV that keeps clipping mirrors or running boards on a standard-width 4-post — the PRO9000's added width is the difference between a comfortable drive-on and a stressful one every single time

What the PRO9000 Is NOT Built For

• ❌ Shops requiring ALI/ETL certification — consider the APEX9 instead
• ❌ Garages with tighter floor space — the PRO9000's extra-long footprint needs more room

Questions about fit or capacity? Call Alamo at (844) 480-6059.

What Makes the PRO9000 Different

9,000 lbs with Extra-Wide, Extra-Tall, Extra-Long Dimensions

Rated for 9,000 lbs with 85" (7' 1") of rise height to the top of the runway, the PRO9000 is built with genuinely larger dimensions throughout — not just a higher capacity number on a standard-size frame.

Single-Point Lock Release, Lock-Ladder Design, Double Lock Safety

The same proven double-lock safety architecture used across Atlas's 4-post line — single-point release, lock-ladder design, redundant locking — scaled to the PRO9000's larger platform.

Standard Electrical, Standard Slab Requirements

The PRO9000 runs on 110V single-phase power with a 30A breaker required, and needs a standard reinforced slab — confirm exact PSI and depth with Alamo before install.

Backed by Atlas, Serviced by Alamo

The PRO9000 carries Atlas's 2-year structural / 1-year hydraulic parts-only warranty. Every claim runs through Alamo directly — call (844) 480-6059 and we handle it.

A Genuinely Larger Footprint for Larger Vehicles

At 131 1/2" wide with the motor (123 1/2" without) and 97 1/4" of drive-thru clearance, the PRO9000 needs real bay space to match its extra-large dimensions. Measure carefully and call Alamo before ordering.

Full Specifications — PRO9000

Atlas Warranty — PRO9000

Atlas backs the PRO9000 with its published warranty terms for this model — verified from Atlas’s own product documentation (manufacturer-web source). Coverage varies by model in the Atlas standard car lift line; the terms below are specific to the PRO9000 and should not be assumed to apply to other Atlas models.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it.