Atlas® Platinum PVL14OF Open Front Align Lift #ATEAP-PVL14OF-EXT-FPD
Couldn't load pickup availability
| Model / Part Number | ATEAP-PVL14OF-EXT-FPD |
| Capacity | 14,000 lbs |
| ALI/ETL Certified | Yes — ALI Certified |
| Lift Type | 4-Post open-front alignment lift, ALI certified |
| Lifting Configuration | Open-front design (no front crossbeam), hidden-cylinder cable lifting system, air-operated single-point lock release |
| Minimum Ceiling Height | 9' 6" |
| Overall Height | 92 1/2" (7' 8 1/2") rear / 109 1/4" (9' 1 1/4") front |
| Overall Width | 148 3/4" with motor / 140 1/8" without (12' 4 3/4" / 11' 8 1/8") |
| Drive-Thru Clearance | 94 1/2" (7' 10 1/2") |
| Rise Height | 73 1/4" (6' 1 1/4") lifting height |
| Motor / Electrical | 220V single phase, 30A breaker required — powered by the ALLY Hydraulic AL3000 power unit |
- Standard reinforced slab — confirm exact PSI/depth with Alamo before install
- Verify with Alamo before ordering
- 220V single phase, 30A breaker required — powered by the ALLY Hydraulic AL3000 power unit
- Have an electrician confirm your circuit before install day
- Plan for 92 1/2" (7' 8 1/2") rear / 109 1/4" (9' 1 1/4") front overall lift height
- Measure to lowest obstruction, not peak
Atlas Platinum PVL14OF-EXT — 14,000 lbs 4-Post open-front alignment lift, ALI certified
A standard 4-post crossbeam blocks exactly the area an alignment tech needs clearest: the front end, where steering linkage, control arms, and undercarriage components all need unobstructed access. Working around a crossbeam on every alignment costs time and makes some inspection points awkward or impossible to reach cleanly.
The Atlas Platinum PVL14OF-EXT removes that obstruction with an open-front design rated to 14,000 lbs and ALI certified, built to handle wheelbases up to 203” for trucks, vans, and larger fleet vehicles alongside standard passenger cars. Call Alamo at (844) 480-6059 for details on fit, install, and pricing.
Who the PVL14OF-EXT Is Built For
- Alignment shops tired of working around a front crossbeam every time a steering or suspension inspection calls for a clean line of sight to the front end
- Shops servicing larger vehicles — trucks, vans, SUVs, and fleet vehicles with wheelbases up to 203” — that a standard-length alignment lift cannot accommodate
- Facilities that want factory-installed slip plates and turntables standard, without retrofitting a bolt-on alignment kit onto a general lift
- Shops that do NOT currently need rolling bridge jacks and would rather buy the open-front lift on its own instead of paying for the RJ7000 Combo bundle
- Owners replacing an older alignment lift whose crossbeam has become a recurring complaint from techs on longer or lower vehicles
- Facilities that may add RJ7000 rolling jacks later and want to confirm the standalone lift is compatible before deciding on the combo
What the PVL14OF-EXT Is NOT Built For
- ❌ Shops on a budget that don't need the open-front design — the standard PVL14 combo costs less
- ❌ Facilities without external compressed air for the lock release
Questions about fit or capacity? Call Alamo at (844) 480-6059.
What Makes the PVL14OF-EXT Different
14,000 lbs, 73 1/4" of Rise — Built for Full-Size Alignment Work
The PVL14OF-EXT carries 14,000 lbs while delivering 73 1/4" of lift, giving techs standing-height access on trucks, vans, and larger SUVs without straining to reach undercarriage components.
No Front Crossbeam Means Nothing Between the Tech and the Front End
The open-front design eliminates the crossbeam entirely, so steering linkage, control arms, and front suspension components are visible and reachable from any angle — no ducking under a beam or working blind on one side.
The AL3000 Power Unit Is Sized for This Lift’s Rise and Capacity
A 220V, 30A single-phase circuit paired with the Ally Hydraulic AL3000 power unit is matched to the open-front design’s taller lift and heavier-vehicle capacity — confirm exact PSI and slab depth with Alamo before your install date.
5-Year Structural Warranty, Serviced by Alamo
The 5-year structural / 2-year hydraulic / 2-year power unit parts warranty backs the build. Call (844) 480-6059 for service and reach the team that installed your PVL14OF-EXT, not a manufacturer switchboard.
A Wider Footprint for a Wider Range of Vehicles
At up to 148 3/4" wide with motor and 94 1/2" of drive-thru clearance, the PVL14OF-EXT is sized for the longer wheelbases and larger vehicles its open-front design is built to serve. Confirm these dimensions against your bay with Alamo before ordering.
- ✅ Alignment shops needing unobstructed front-end access for steering, suspension, and undercarriage work
- ✅ Shops servicing larger vehicles with wheelbases up to 203" — trucks, vans, SUVs, and fleet vehicles
- ✅ Facilities that want factory-standard slip plates and turntables without adding a bolt-on alignment kit
- ❌ Shops on a budget that don't need the open-front design — the standard PVL14 combo costs less
- ❌ Facilities without external compressed air for the lock release
PVL14OF-EXT vs. Atlas® Platinum PVL14OF-EXT + RJ7000 Combo — Which Lift Is Right for Your Shop?
| Decision Point | PVL14OF-EXT | Atlas® Platinum PVL14OF-EXT + RJ7000 Combo |
|---|---|---|
| Includes | PVL14OF-EXT lift only | PVL14OF-EXT lift + 2 RJ7000 rolling jacks |
| Best fit | Alignment work without wheel-free service | Shops that also need wheel-free brake/suspension access |
Choose this standalone PVL14OF-EXT if you only need alignment-ready lifting without wheel-free jacking. Choose the PVL14OF-EXT + RJ7000 Combo if you also want wheel-free brake and suspension access bundled in. Both stay inside Alamo’s catalog — call (844) 480-6059.
Full Specifications — PVL14OF-EXT
| Model / Part Number | ATEAP-PVL14OF-EXT-FPD |
| Capacity | 14,000 lbs |
| ALI/ETL Certified | Yes — ALI Certified |
| Lift Type | 4-Post open-front alignment lift, ALI certified |
| Lifting Configuration | Open-front design (no front crossbeam), hidden-cylinder cable lifting system, air-operated single-point lock release |
| Minimum Ceiling Height | 9' 6" |
| Overall Height | 92 1/2" (7' 8 1/2") rear / 109 1/4" (9' 1 1/4") front |
| Overall Width | 148 3/4" with motor / 140 1/8" without (12' 4 3/4" / 11' 8 1/8") |
| Drive-Thru Clearance | 94 1/2" (7' 10 1/2") |
| Rise Height | 73 1/4" (6' 1 1/4") lifting height |
| Motor / Electrical | 220V single phase, 30A breaker required — powered by the ALLY Hydraulic AL3000 power unit |
| Concrete / Floor Requirement | Standard reinforced slab — confirm exact PSI/depth with Alamo before install |
| Warranty | 5-year structural / 2-year hydraulic / 2-year power unit — parts only |
| Overall Length with Approach Ramp | 272 1/8" (22' 8 1/8") |
| Runway Length | 223 1/2" (18' 7 1/2") |
| Maximum Wheel Base | 203" (16' 11") |
| Air Requirement | 85-115 PSI (external air supply required) |
| Includes | Built-in slip plates and turntables, steel approach ramps |
⚠️ Installation Requirements
- Ceiling height: Plan for 92 1/2" (7' 8 1/2") rear / 109 1/4" (9' 1 1/4") front overall lift height; measure to the lowest obstruction.
- Electrical: 220V single phase, 30A breaker required — powered by the ALLY Hydraulic AL3000 power unit; consult an electrician for exact breaker sizing.
- Floor / Concrete: Standard reinforced slab — confirm exact PSI/depth with Alamo before install.
- Bay width: Confirm 148 3/4" with motor / 140 1/8" without (12' 4 3/4" / 11' 8 1/8") floor width clearance; measure before ordering.
- Surface anchoring: Anchor per manufacturer specification where applicable — do not skip anchoring on production bays.
- Installation: Alamo installs every lift we sell. Call (844) 480-6059 to schedule.
Atlas Platinum Warranty — PVL14OF-EXT
Atlas backs the PVL14OF-EXT with its published warranty terms for this model. Coverage varies by model in the Atlas standard car lift line; the terms below are specific to the PVL14OF-EXT and should not be assumed to apply to other Atlas models.
| Component | Coverage Term |
|---|---|
| Structural components | 5 years |
| Hydraulic components | 2 years |
| Power unit | 2 years |
| Wear items & accessories | Not covered (consumable, parts-only warranty) |
Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it.
❓ Frequently Asked Questions — PVL14OF-EXT
What does "open front" mean on this lift?
Unlike traditional 4-post lifts with a front crossbeam, the PVL14OF-EXT has no front obstruction, giving technicians unrestricted access for alignment, steering, and suspension work.
What's the maximum wheelbase this lift supports?
203" (16' 11") — enough for most trucks, vans, and larger SUVs. Call Alamo to confirm your specific vehicle.
Can I add rolling bridge jacks later?
Yes — the lift has integrated rolling jack tracks for Atlas Platinum RJ7000 jacks (sold separately), or you can buy the pre-bundled Combo version with jacks included.
Is this lift ALI certified?
Yes, ALI certified, with built-in slip plates and turntables standard from the factory.
Why Buy the PVL14OF-EXT from Alamo Equipment & Service?
- We install it. An open-front lift needs precise alignment of the runways with no crossbeam to reference — our crew anchors and levels the PVL14OF-EXT so the open design does not compromise structural rigidity.
- We service it. The hidden-cylinder cable system and AL3000 power unit both need real service knowledge — call (844) 480-6059 and reach the team that installed your PVL14OF-EXT, not a manufacturer hotline.
- We size it with you. At up to 148 3/4" wide and 109 1/4" tall at the front, confirm your bay clears the open-front footprint with Alamo before you order.
- Free shipping. The PVL14OF-EXT ships free to all 48 contiguous states — no freight surprise on your invoice.
- Expert comparison help. Thinking you might need rolling bridge jacks down the road? Call (844) 480-6059 to compare this standalone lift against the PVL14OF-EXT + RJ7000 Combo before you decide.
A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.
Shipping Information:
Customers may pick up their lift at the nearest freight terminal at no additional cost.
You will need to provide your own trailer. Terminal staff will safely load the lift onto your trailer. The RECEIVER/CUSTOMER is solely responsible for properly securing the load for transport.
To schedule a pickup, contact us at info@alamoequipment.com or
(844) 480-6059. Please include the lift model and your zip code so we can direct you to the appropriate terminal.
Atlas Warranty Information
- 5-Year Structural Warranty
- 2-Year Hydraulic-Power Warranty
