Atlas® 1,000 lb Air-Operated Motorcycle Lift #ATEHT-CYCLELIFT-FPD

Atlas CycleLift — 1,000 lbs Air-operated motorcycle/powersports lift

Wrestling a full-size cruiser or touring bike onto a wheel chock by yourself is how backs get thrown out and paint gets scratched. The Atlas CycleLift solves that with a 1,000 lb air-operated table built specifically for bikes with real wheelbase — a foot-pedal air valve raises the table to 33" without you ever bending under the frame. Call Alamo at (844) 480-6059 and we will confirm it fits your bay before you buy.

Who the CycleLift Is Built For

• Motorcycle shops running back-to-back service tickets on full-size cruisers and touring bikes where a slow, manual table would bottleneck the bay
• Shops that already have a compressed air line run to the service area and want a foot-pedal lift instead of a hand-crank or electric unit
• Higher-volume motorcycle bays where hands-free operation lets a tech keep both hands on the bike while raising or lowering the table
• Service writers who need to move a bike in, lift it, and move the next one in fast — the CycleLift's 93" table takes cruisers and tourers without the front wheel hanging off the edge
• Shops doing tire changes, chain and sprocket work, and general maintenance where a stable, hands-free platform beats a jack stand and wheel chock setup

What the CycleLift Is NOT Built For

• ❌ Shops without a compressed air line — the CycleLift is air-operated only
• ❌ Vehicles or loads over 1,000 lbs

Questions about fit or capacity? Call Alamo at (844) 480-6059.

What Makes the CycleLift Different

Built for Full-Size Bikes, Not Just Sport Bikes

A 1,000 lb capacity and a 93" table (113" with the approach ramp) means the CycleLift is sized for cruisers and touring bikes that would overhang a shorter lift. Rise height reaches 33" (2' 9") full lift height, giving you real standing clearance to work chains, exhausts, and lower fairings without crouching.

Front Wheel Vise Plus Removable Rear Section

The front wheel vise locks the bike upright the moment it rolls on, so you are never holding a bike steady with one hand while you work with the other. The removable rear section then opens up access for wheel-off work, tire changes, and rear suspension service without disturbing the front clamp.

Air-Operated Means No Electrical Install

Run on 90-100 PSI shop air with no electric motor, breaker, or wiring to schedule. If your bay already has a compressed air drop, the CycleLift's foot-pedal control is ready to go the same day — check your air supply and Alamo will confirm the fit before you order.

Backed by Atlas and Serviced by Alamo

The CycleLift carries Atlas's 1-year parts-only warranty, and Alamo handles every warranty claim directly — no manufacturer hotline, no waiting on hold. Call (844) 480-6059 and we take care of it.

Sized to Actually Fit Your Bay

At 24" of table width and a 12" lowered height, the CycleLift tucks into a compact footprint when it's not in use, and the removable approach ramp gives you a real 20" drive-on clearance. Measure your bay against these numbers, and call before you order if anything looks close.

Full Specifications — CycleLift

Atlas Warranty — CycleLift

Atlas backs the CycleLift with its published warranty terms for this model — verified from Atlas’s own product documentation (manufacturer-web source). Coverage varies by model in the Atlas standard car lift line; the terms below are specific to the CycleLift and should not be assumed to apply to other Atlas models.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it.