Challenger ALI HD Mobile Column Lift 19,000 lbs - Single #CLHM-190W

Challenger 19,000 lb Mobile Column Lift — Wide Forks

A heavy-truck shop lands the 19,000 lb column capacity it needs, but the vehicle rolls up on oversized or unusual tire/wheel combinations — minimum wheel diameters smaller than a standard column footprint can safely cradle. Capacity alone doesn't solve that; the column's physical stance has to accommodate the tire too. That's the problem the Challenger CLHM-190W is built to solve.

The CLHM-190W carries the same 19,000 lb per-column rating and 2,600 PSI hydraulic system as the standard CLHM-190, but with a 49" wide column footprint — 4.75" wider than the standard 190's 44.25" — and a minimum wheel diameter down to 4" versus the standard model's tighter range. That wider stance is the entire reason this variant exists: it's for the same heavy-duty capacity tier, just built to handle oversized or unusual wheel/tire combinations the standard-width 190 wasn't designed to accommodate. It's fully compatible in the same wireless set as CLHM-125XF and CLHM-140 columns for mixed fleets.

Who the CLHM-190W Is Built For

• A heavy-truck shop that services vehicles with oversized or unusual wheel/tire combinations where the standard CLHM-190's 44.25" column footprint doesn't give adequate clearance or stance.
• A fleet operation working with wheels down to a 4" minimum diameter — a range the standard-width 190 isn't built to cover safely.
• A shop that needs the full 19,000 lb per-column heavy-duty capacity but has run into fitment issues with a standard-width column on specific truck or trailer configurations.
• An operation already running CLHM-125XF or CLHM-140 columns that wants to add wide-footprint, high-capacity columns to the same wireless set for its widest-wheel vehicles.
• A commercial service center where floor clearance around the vehicle has already been confirmed to accommodate the wider 49" column stance before ordering.
• A shop standardizing on wide-fork columns across its heaviest-duty lift positions to avoid mismatched column footprints in the same set.

What the CLHM-190W Is NOT Built For

If your fleet runs standard wheel and tire sizes without unusual diameters, the wider 49" footprint of the CLHM-190W adds no benefit over the standard-width CLHM-190 — and the narrower stance is easier to fit in tighter floor spaces. If you don't need the full 19,000 lb rating, the CLHM-140 covers lighter commercial work at a lower cost per column.

What Makes the CLHM-190W Different

Wide 49" Column Footprint

The CLHM-190W's column stance measures 49" wide — 4.75" wider than the standard CLHM-190's 44.25". That extra width isn't cosmetic: it's what lets the column safely accommodate a broader minimum wheel diameter, down to 4", for oversized or unusual tire/wheel combinations that a standard-width column footprint wasn't designed to cradle.

19,000 lb. Per-Column Capacity

The wide-fork configuration doesn't trade away capacity to get its wider stance — it carries the same 19,000 lb per-column rating as the standard CLHM-190. A shop gets the wider wheel-fit range without stepping down to a lighter-duty column.

Wireless Radio Control

Twelve radio frequencies with a wide channel range keep the CLHM-190W's control signal isolated from adjacent column sets. In a shop running multiple heavy-duty sets in different bays, that separation prevents cross-talk between sets operating at the same time.

110V Multi-Stage Charging

Despite the heavier-duty rating and wider footprint, the CLHM-190W still charges off standard household-voltage (110V) power through a multi-stage charging cycle — no dedicated high-voltage circuit required at the charging station.

Compatible with CLHM-125XF and CLHM-140

The CLHM-190W networks wirelessly into the same set as CLHM-125XF and CLHM-140 columns, so a mixed commercial fleet can combine standard, extended-fork, and wide-fork columns in one set rather than running separate equipment for each wheel configuration.

Full Specifications

Challenger Warranty — CLHM-190W

Challenger backs the CLHM-190W with the following coverage terms.

Warranty service is through Alamo Equipment & Service. When you buy from us, you're not waiting on a manufacturer's 800 number — you're calling us at (844) 480-6059 and we dispatch a tech. That's the difference between buying from a box shipper and buying from Alamo.

⚠️ Warranty terms above are sourced from Challenger's canonical warranty policy documentation. Confirm exact terms at the time of purchase.