Challenger CLMM Medium Duty Mobile Column ALI Lift (Single) #CLMM-5000

SKU: ALMCHACLMM5000
Regular price $9,449.06
Regular price -45% $17,180.11 Sale price $9,449.06
In stock
Usually ships within 24 hours

Got questions?

Feel free to

Email: info@alamoequipment.com

Phone: (844) 480-6059

Email your Request to Alamo's Pros

ALI Certified Vehicle Lift
ALI/ETL Certified
The CLMM-5000 is independently certified by the Automotive Lift Institute (ALI). ALI certification means this lift has been independently tested to meet ANSI/ALI ALCTV safety standards — the same standard OSHA references. Verify at autolift.org →
📚 Manuals & Resources
Need installation help? Call Alamo at (844) 480-6059 — we install, service, and inspect every lift we sell.
⚡ Quick Specs
Model / Part Number CLMM-5000
Brand Challenger
Lifting Capacity per Column 5,000 lbs
Height of Lift Unit 88.55"
Height of Lift Unit at Full Rise 157"
Width of Lift Unit 38.5"
Length of Lift Unit 46.75"
Max. Lift Height (4 Units) 69"
Questions about power, air supply, or bay fit? Call (844) 480-6059 — Alamo's install team will walk you through requirements before you order.
🔧 Will the CLMM-5000 Fit Your Bay?
Check your bay against the numbers below. If you clear them, you're good to go. Close on any of them? Call us and we'll confirm before you order.
MIN. BAY SIZE
Flexible — sized to vehicle, not a fixed bay
width x length
CAPACITY
5,000 lbs per column
rated lifting capacity
CONFIGURATION
Single Column, Medium Duty
Lightest-duty mobile column in this batch — sized for light/medium commercial vehicles, not heavy trucks or buses.
📞 Not sure if your bay clears? Call Alamo's install team at (844) 480-6059 and we'll walk through your measurements before you order.
🏗️ Site Prep — What Your Bay Needs Before Install Day
Have these ready and your install day goes smoothly. Don't have them yet? Call us first — we'll help you plan.
🛠 Concrete
  • 4" minimum reinforced slab
  • 6" preferred for production bays
  • Must be fully cured before anchor installation
⚡ Power
  • Confirm with Alamo before install
  • Have an electrician run a dedicated circuit to the bay before install day
💨 Air Supply
  • Confirm with Alamo before install
  • Confirm shop air line reaches the bay before install day
🔨 Alamo Installs Every Lift We Sell
We show up, anchor it, wire it, and hand you the keys. One number. One invoice. No coordinating contractors, no guessing if it's done right.
📞 (844) 480-6059
Talk to Alamo's install team

Challenger 5,000 lb Medium-Duty Mobile Column Lift

A mobile service operation or light-commercial shop needs to lift passenger cars and light vans in the field, at a customer's lot, or in a bay that changes from job to job — but a heavy-duty column set built for buses and 4-axle trucks is overkill, harder to move, and more expensive than the job requires. That gap is where the Challenger CLMM-5000 fits.

The CLMM-5000 is a medium-duty mobile column rated at 5,000 lbs per column, sold individually and typically run as a set of 4 for 20,000 lbs of total capacity. That puts it in a different weight class entirely from the CLHM series (12,500–19,000 lbs per column) built for heavy trucks and buses — the CLMM-5000 is sized specifically for light-to-medium commercial vehicles and passenger cars. It adds heavy-duty tow handles and spring-loaded wheels built for being rolled shop-to-shop, not just bay-to-bay, which matters for mobile service work the CLHM columns aren't designed around.

Who the CLMM-5000 Is Built For

  • A mobile service operation that needs to tow its lift equipment from job to job, not just reposition it within one fixed shop.
  • A light-commercial or passenger-vehicle shop that doesn't need the CLHM series' 12,500+ lb per-column heavy-truck capacity and would rather not pay for capacity it won't use.
  • A shop running a 4-column set for 20,000 lbs total capacity on cars, SUVs, and light vans, where a full heavy-duty column set would be oversized for the vehicle mix.
  • An operation working across uneven shop floors or outdoor surfaces where spring-loaded wheels make a real difference in day-to-day maneuverability.
  • A shop prioritizing a wireless, no-air-required setup so columns can be moved and set up without running compressed air lines to each position.
  • A budget-conscious buyer who wants Challenger build quality and 110V charging convenience without the cost premium of the heavy-duty CLHM line.

What the CLMM-5000 Is NOT Built For

The CLMM-5000's 5,000 lb per-column rating isn't enough for heavy trucks, buses, or large commercial vehicles — for that range, step up to the CLHM-140 (14,000 lbs per column) or the CLHM-190 (19,000 lbs per column). Note also that the CLMM-5000 is not ALI certified, unlike the CLHM series — if certified equipment is a requirement for your shop's insurance or compliance program, factor that in before ordering.

What Makes the CLMM-5000 Different

Set of 4 = 20,000 lb. Total Capacity

Four CLMM-5000 columns wirelessly connected lift a full vehicle up to 20,000 lbs total. That's purpose-sized for light-to-medium commercial vehicles and passenger cars — not the heavy-truck and bus range the CLHM series is built for. A shop whose vehicle mix tops out in this range gets the right-sized equipment instead of paying for heavy-duty capacity that never gets used.

Heavy-Duty Tow Handles

The CLMM-5000's tow handles are built to move the column shop-to-shop, not just bay-to-bay. For a mobile service operation, that's the difference between equipment that stays fixed to one location and equipment that travels with the job.

Spring-Loaded Wheels

Spring-loaded wheels absorb the bumps of uneven shop floors, gravel lots, or transition seams between indoor and outdoor surfaces — without needing a powered dolly to move the column comfortably.

Wireless, No Air Required

The CLMM-5000 runs entirely on battery power, with no compressed air line required at the column position. For mobile or field service work, that removes one more piece of infrastructure the crew would otherwise have to set up before they can start lifting.

110V Charging System

Columns charge off standard household-voltage (110V) power — no dedicated high-voltage circuit needed at the charging station, which keeps the setup simple whether the columns charge at a shop or in a service truck overnight.

✅ Best For
  • Wireless battery-powered medium-duty mobile column lift applications
  • Shops needing 5,000 lbs per column certified alignment capacity
  • Facilities with at least Flexible — sized to vehicle, not a fixed bay of bay space
⚠️ Not Ideal For
  • General repair bays without dedicated alignment volume
  • Shops with bay space below Flexible — sized to vehicle, not a fixed bay

CLMM-5000 vs. Atlas 66,000 lb Battery Mobile Column Lift (Set of 4) — ALI Cert. #ATEML-4030BC — Which Fits Your Shop?

Feature CLMM-5000 Atlas 66,000 lb Battery Mobile Column Lift (Set of 4) — ALI Cert.
Lift type Wireless battery-powered medium-duty mobile column lift Battery-powered mobile column lift
Capacity 5,000 lbs per column 16,500 lbs per column (4-column set)
Configuration Single Column, Medium Duty Wireless battery mobile column
Warranty Challenger (see Warranty tab) Confirm current term with Atlas at purchase
Best use case Wireless battery-powered medium-duty mobile column lift 16,500 lbs per column (66,000 lbs / 4-column set) — nearby per-column capacity class

The right choice depends on your bay type and alignment volume — not just preference. Call (844) 480-6059 and we'll help you decide.

Full Specifications

Model / Part Number CLMM-5000
Brand Challenger
Lifting Capacity per Column 5,000 lbs
Height of Lift Unit 88.55"
Height of Lift Unit at Full Rise 157"
Width of Lift Unit 38.5"
Length of Lift Unit 46.75"
Max. Lift Height (4 Units) 69"
Max. Lift Height (2 Units, Normal Mode) 32"
Min. - Max. Wheel Diameter 6" - 22"
Max. Hydraulic Operating Pressure 2,230 PSI
Lift Speed (Max. Load) 60" per minute
Colors Available Black

⚠️ Installation Requirements

  • Bay size: Minimum Flexible — sized to vehicle, not a fixed bay recommended — confirm before ordering
  • Electrical: Confirm exact breaker sizing with a licensed electrician before install day
  • Concrete: Minimum 4" reinforced concrete slab; 6" preferred for production environments
  • Surface anchoring: Lift must be anchored per manufacturer specification — do not skip anchoring on production bays
  • Installation: Alamo installs every lift we sell. Call (844) 480-6059 to schedule.

Challenger Warranty — CLMM-5000

Challenger backs the CLMM-5000 with the following coverage terms.

Component Coverage Term
Labor 1 year
Functional Parts 1 year
Structural Parts 5 years
Wear Items / Accessories 90 days

Warranty service is through Alamo Equipment & Service. When you buy from us, you're not waiting on a manufacturer's 800 number — you're calling us at (844) 480-6059 and we dispatch a tech. That's the difference between buying from a box shipper and buying from Alamo.

⚠️ Warranty terms above are sourced from Challenger's canonical warranty policy documentation. Confirm exact terms at the time of purchase.

Frequently Asked Questions — CLMM-5000

What bay size do I need for the CLMM-5000?

Plan for a minimum bay of Flexible — sized to vehicle, not a fixed bay. Lightest-duty mobile column in this batch — sized for light/medium commercial vehicles, not heavy trucks or buses. Call Alamo at (844) 480-6059 and we'll confirm your measurements before you order.

Is the CLMM-5000 ALI certified?

Yes, this is ALI Certified.

What's the lifting capacity of the CLMM-5000?

5,000 lbs per column.

What's included with the CLMM-5000?

Each CLMM-5000 ships as a complete column with heavy-duty tow handles, spring-loaded wheels, and the 110V charging system included. Columns are sold individually, and a typical set of 4 reaches 20,000 lbs total capacity — additional columns beyond the set of 4 are ordered separately. Call (844) 480-6059 to confirm your exact configuration.

Why Buy the CLMM-5000 from Alamo Equipment & Service?

  • We deliver and set it up. The CLMM-5000 is a portable mobile column, not a bolted-down fixed lift — we deliver your set of 4, walk your team through wireless pairing and charging, and confirm it's sized right for your light-to-medium vehicle mix before we leave.
  • We service it. When something needs attention after the install, we're the same people you call. Not a national warranty line.
  • We size it with you. 5,000 lbs per column capacity (20,000 lbs as a set of 4) — mobile columns position around any vehicle, no fixed bay footprint required. We'll confirm the right column count for your shop before you buy.
  • Free shipping. Delivered to your shop, no hidden freight fees.
  • Expert comparison help. Not sure if this is the right fit vs. the Atlas 66,000 lb Battery Mobile Column Lift (Set of 4) — ALI Cert. #ATEML-4030BC? Call (844) 480-6059 — we'll walk you through it.

A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.

Free shipping: Orders ship free to the 48 contiguous states.

Real lift support: Alamo can help with model selection, bay fit, installation planning, maintenance, inspections, and service after the sale.

Commercial shop focus: This is not a generic pallet drop. You are buying from a team that works with automotive shop equipment every day.

Questions before you order? Call (844) 480-6059

Shipping Information:

Customers may pick up their lift at the nearest freight terminal at no additional cost.

You will need to provide your own trailer. Terminal staff will safely load the lift onto your trailer. The RECEIVER/CUSTOMER is solely responsible for properly securing the load for transport.

To schedule a pickup, contact us at info@alamoequipment.com or 
(844) 480-6059. Please include the lift model and your zip code so we can direct you to the appropriate terminal.

Challenger Warranty

Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson. Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.

Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.

Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @ www.challengerlifts.com/register-your-lift

Click here to enlarge Challenger Lift Warranty Chart