Falcon 28" Wide 2200 lb Electric Hydraulic Lift Table for Motorcycles, ATVs #MT2200

APlusLift Falcon MT2200 — 2,200 lbs Electric/hydraulic motorcycle/ATV/UTV/snowmobile lift table, 28" wide

Not every shop has compressed air run to every bay, and not every bike is light enough for a standard-capacity table. Shops working on heavier cruisers, trikes, and ATVs need a lift table that can handle more weight and run on power they already have — without waiting on an air compressor install first.

The APlusLift Falcon MT2200 solves both problems at once: it's electric/hydraulic instead of air-operated, running on standard 110V power, and it's rated for 2,200 lbs — noticeably more capacity than the air-operated MT1500 series. At 28" wide, it's the standard-width option in the Falcon series, sized for typical motorcycles without the extra footprint of the wider MT2200X. Note: this model has shown call-for-availability status — call Alamo at (844) 480-6059 to confirm current stock and lead time before ordering.

Who the MT2200 Is Built For

• The shop that just quoted a compressed-air line install for a new lift table and realized the labor and materials cost more than the table itself — the MT2200 skips that entirely and plugs into a standard 110V outlet
• A tech who's had a heavier trike bottom out the weight rating on an air-operated table mid-job — the MT2200's 2,200 lb ceiling covers that vehicle with real margin instead of pushing the limit
• A shop working on a full touring bike with saddlebags and a trunk still attached that needs the rear wheel to drop clear for a tire change — the drop-out tail handles that without unbolting bodywork first
• An independent garage replacing a table that's started leaking or losing pressure over the years, wanting hydraulic reliability instead of another air-seal that will eventually wear out
• A shop in a building without a compressor at all — detached garages, strip-mall bays, or new locations where running shop air isn't practical but a 110V circuit already exists
• A buyer planning ahead on timing, since this model has shown call-for-availability status and a shop that needs it for a specific job date should confirm lead time with Alamo before committing to a deadline

What the MT2200 Is NOT Built For

• ❌ Shops that already have compressed air infrastructure and prefer the air-operated MT1500 series
• ❌ Shops needing extra table width for trikes — see the MT2200X with side extensions

Questions about fit or capacity? Call Alamo at (844) 480-6059.

What Makes the MT2200 Different

2,200 lbs Capacity, 47 1/4" of Rise

The MT2200 handles heavier motorcycles, trikes, ATVs, and UTVs up to 2,200 lbs — well beyond the 1,500 lb ceiling of the air-operated MT1500 series. Rise height runs from a 6 5/16" minimum up to a full 47 1/4", giving a tech genuine standing-height clearance for underside work instead of stopping at waist height.

Automatic Locking and a Drop-Out Tail for Real Service Work

The MT2200 uses an automatic 7-position safety locking system paired with electric/hydraulic power and a drop-out tail section. That drop-out tail matters for real shop work — it lets a tech remove the rear wheel and swingarm assembly without fighting the table structure, something a fixed-platform table can't do.

Standard 110V Power — No Shop Air Line Needed

The MT2200 runs on standard 110V, 60Hz single-phase power through a movable power unit station — no compressed air line required at all, which matters for shops that haven't invested in air infrastructure. It sits on a standard shop floor thanks to its portable design. Overall height is 47 1/4" at full lift — confirm your bay clearance with Alamo before ordering.

Atlas Build Quality Backed by a Real Warranty

The MT2200 carries Atlas's 2-year (24 months) parts warranty. Warranty service runs through Alamo — call (844) 480-6059 for any claim or service question, so a shop always has a direct line instead of a manufacturer call center.

A Standard 28" Footprint Without Side Extensions

Overall width is 28" without side extensions — the standard-width option in the Falcon electric/hydraulic series, sized for typical motorcycles. Confirm this footprint against your bay before ordering; Alamo will walk through the numbers with you.

Full Specifications — MT2200

APlusLift Falcon Warranty — MT2200

Atlas backs the MT2200 with its published warranty terms for this model — verified from Atlas’s own product documentation (manufacturer-web source). Coverage varies by model in the Atlas standard car lift line; the terms below are specific to the MT2200 and should not be assumed to apply to other Atlas models.

Warranty service is through Alamo Equipment & Service. When you buy from us, you are not waiting on a manufacturer hotline — call (844) 480-6059 and we handle it.