Hofmann 12K Scissor Alignment Lift — Surface Mount #EELR709APKG

Hofmann 12,000 lb Scissor Alignment Lift — Surface Mount

Shops adding a dedicated alignment bay often run into the same problem with 4-post racks: the closed, boxed-in runway makes it harder for a tech to get underneath for suspension work, and installing a recessed pit isn't always practical on an existing slab. What most shops actually need is an open, low-profile lift that handles alignment work just as accurately without the construction headache.

The Hofmann EELR709APKG is a 12,000 lb scissor-style alignment lift built to install directly on top of your existing floor — no recessed pit, no cutting concrete. The open-center scissor design gives techs full access underneath the vehicle from every angle, which is the opposite of the boxed-in feel of a closed-front 4-post rack like the EELR728APKG. If your shop wants alignment accuracy with easier underbody access and a simpler install, the surface-mount scissor is the right call over the 4-post configuration.

Who the EELR709APKG Is Built For

• Shops that want scissor-lift alignment accuracy and open-center accessibility but can't cut into their existing slab — surface mount installs on top of the floor you already have.
• Facilities planning to relocate or reconfigure their shop layout in the next few years — surface-mount lifts can be relocated without abandoning a recessed pit.
• Independent alignment shops with a 15' x 25' bay who need the open-center design for techs to walk completely around the vehicle during alignment adjustments.
• Shops moving into a leased building where permanent floor modifications aren't an option — surface mount avoids that conversation with the landlord entirely.
• Tire centers adding dedicated alignment service without a full renovation — this installs in a day, not the weeks a flush-mount recessed installation takes.
• Shops running 12,000 lb passenger cars, SUVs, and light trucks that don't need the larger 14K scissor footprint but still want scissor-style accessibility over a 4-post.

What the EELR709APKG Is NOT Built For

If your shop's floor plan can accommodate a recessed pit and you want the maximum stability of a fixed 4-post runway, the EELR728APKG 4-post closed-front lift is worth a look. The EELR709APKG's surface-mount design also asks for a larger 15' x 25' bay footprint than the compact 4-post model, so tight bays should confirm clearance before ordering.

What Makes the EELR709APKG Different

12,000 lb. Lifting Capacity

12,000 lbs covers passenger cars, SUVs, and light trucks with room to spare, so your alignment bay isn't the limiting factor on which vehicles you can service. Techs run the same rack for a compact sedan in the morning and a loaded pickup in the afternoon without swapping equipment.

Surface Mount Design

Because the EELR709APKG bolts directly to your existing slab instead of dropping into a recessed pit, there's no concrete cutting, no pit drainage to plan for, and a much shorter path from delivery to first alignment job. That matters most for shops retrofitting an alignment bay into an existing building.

Scissor Alignment Lift Configuration

The scissor platform's open center is purpose-built for alignment work — turnplates and slip plates sit right where your tech needs them, and there's a clear line of sight to the undercarriage the whole time the vehicle is raised. That translates into fewer wasted movements per job.

Heavy-Duty Hydraulic System

A commercial-grade hydraulic system keeps the platform steady under full load through repeated daily cycles, which matters on a lift running back-to-back alignments all shift. Consistent hydraulic performance means the rack holds its position rock-solid while your tech is dialing in camber and toe.

Professional Alignment Capability

Built-in support for turntables and slip plates means every alignment job gets accurate steering-angle and wheelbase readings without makeshift accessories. That's the difference between an alignment lift and a lift you're using for alignment work.

• Open Center Design: Improves under-vehicle accessibility
• Heavy-Duty Steel Construction: Built for long-term durability
• Durable Powder-Coated Finish: Helps resist corrosion and wear

Full Specifications — EELR709APKG

Hofmann Warranty — EELR709APKG

Hofmann backs the EELR709APKG with the following coverage terms.

Warranty service is through Alamo Equipment & Service. When you buy from us, you're not waiting on a manufacturer's 800 number — you're calling us at (844) 480-6059 and we dispatch a tech. That's the difference between buying from a box shipper and buying from Alamo.