Hofmann 14K Scissor Align Lift – Short Bay Flush Mount #EELR784APKG

Hofmann 14,000 lb Scissor Alignment Lift — Short Bay Flush Mount

Shops with compact alignment bays often get stuck choosing between a full-length alignment lift that doesn't physically fit their space, or settling for a smaller rack that can't handle heavier trucks and fleet vehicles. Neither option is good — you either lose bay space you don't have, or you cap your own capacity.

The Hofmann EELR784APKG solves that with a 222" short-bay footprint — the most compact runway length in the entire 14,000 lb Hofmann scissor lineup — without giving up an ounce of the 14,000 lb capacity. The flush-mount installation means the runways sit level with your shop floor for a clean, walk-off-friendly surface. Compared to the standard-length flush-mount models in this family (EELR788/790, at 256"-271" long), the EELR784APKG is purpose-built for shops that are tight on bay depth but still need full 14K capacity.

Who the EELR784APKG Is Built For

• Shops with a genuinely tight bay depth that can't fit a standard-length 256"+ runway — at 222" overall length, this is the shortest footprint in the entire 14K lineup.
• Facilities doing new construction or a full bay renovation where flush-mount installation is already part of the plan — the clean floor-level finish is worth the recessed pit work.
• Dealerships that want a full 14,000 lb capacity alignment bay without sacrificing the compact footprint that a shorter service bay demands.
• Shops prioritizing a clean, professional shop-floor appearance for customer-facing service areas — flush mount means no visible lift structure between jobs.
• Alignment centers running 4-wheel alignment jobs where the 88"-155" wheelbase range covers most passenger cars and light trucks without needing the extended runway of the standard-length models.
• Shops replacing an older short-bay alignment lift and needing a drop-in footprint match without reworking the existing bay dimensions.

What the EELR784APKG Is NOT Built For

If your bay has the depth to spare and you'd rather not manage the flush-mount floor prep, the standard-length surface-mount EELR787APKG skips the recessed install while giving techs a longer runway for larger wheelbase vehicles. The short-bay EELR784APKG is the better fit specifically when floor space, not runway length, is your constraint.

What Makes the EELR784APKG Different

14,000 lb. Lifting Capacity

14,000 lbs is enough capacity to handle everything from a compact sedan to a loaded 3/4-ton pickup or commercial van, so this compact-footprint lift doesn't force you to turn away heavier alignment work. You get full-size capacity in a bay that wouldn't fit a full-length rack.

Short Bay Flush Mount Design

At 222.38" overall length, the EELR784APKG is the shortest-footprint 14K scissor lift Hofmann offers — roughly 34" shorter than the standard-length models. For a shop working with a tighter alignment bay, that difference can be what determines whether the lift fits at all.

Flush Floor Installation

Flush-mount installation means the runway surface sits level with the surrounding floor when the lift is down, so there's no raised lip to trip over or route a forklift around. It also keeps the bay looking clean and professional for customers who walk through the shop.

Open Front and Rear Configuration

With both the front and rear of the runway open, your tech can walk completely around the vehicle and reach the undercarriage from any angle during the alignment. That open access cuts down on awkward reach-arounds compared to a closed-front design.

ALI Certified Lift

ALI certification confirms this lift has been independently tested against ANSI/ALI safety standards — the same benchmark referenced by OSHA. That gives you a documented safety record for your insurance carrier and peace of mind for every tech who steps under a raised vehicle.

• Ultra-Wide Runways: Accommodates wider wheelbase vehicles
• Hydraulic Scissor Lift System: Delivers dependable lifting performance
• Integrated Safety Lock System: Enhances operational safety
• Includes Alignment Accessories: Rolling jacks, turntables, and slip plates included

Full Specifications — EELR784APKG

Hofmann Warranty — EELR784APKG

Hofmann backs the EELR784APKG with the following coverage terms.

Warranty service is through Alamo Equipment & Service. When you buy from us, you're not waiting on a manufacturer's 800 number — you're calling us at (844) 480-6059 and we dispatch a tech. That's the difference between buying from a box shipper and buying from Alamo.