Atlas APEX 8,000 lb 4-Post Lift & RJ35 Combo #ATEATTD-APEX8-COMBO-FPD

SKU: ALMATLATEATTDAPEX8COMBOFPD
Regular price $7,599.00
In stock
Usually ships within 24 hours
For Will Call Options, call (844) 480-6059 or message and save $250!
ALI Certified Vehicle Lift
ALI/ETL Certified
The APEX8 lift in this combo is independently certified by the Automotive Lift Institute (ALI) — independently tested to meet ANSI/ALI ALCTV safety standards, the same standard OSHA references. The bundled RJ35 jacks are explicitly non-certified — Atlas®'s own combo listing calls them "Non-Certified RJ35 Bridge Jacks."
📚 Manuals & Resources
Need installation help? Call Alamo at (844) 480-6059 — we install, service, and inspect every lift we sell.
Quick Specs
Model / Part Number ATEATTD-APEX8-COMBO-FPD
Combo Includes 1x APEX8 ALI-Certified 4-Post Lift (8,000 lbs) + 2x RJ35 Sliding Jacks (3,500 lbs each, non-certified)
Lift Capacity 8,000 lbs
Overall Column Height 85" (7' 1")
Bay Width 104" (8' 8") w/o motor
Warranty 5-Yr Structural / 2-Yr Hydraulic (Lift, Parts Only)
🔧 Will the Atlas® APEX 8,000 lb 4-Post Lift & RJ35 Combo Fit Your Bay?
Check your bay against the three numbers below. Close on any of them? Call us and we will confirm before you order.
OVERALL COLUMN HEIGHT
85" (7' 1")
lift height
BAY WIDTH
104" (8' 8") w/o motor
overall floor width
MAX VEHICLE WEIGHT
8,000 lbs (lift)
rated capacity
📞 Not sure if your bay clears? Call Alamo at (844) 480-6059 and we will walk through your measurements before you order.
🏗️ Site Prep — What Your Bay Needs Before Install Day
Have these three things ready and your install day is a half-day job. Don’t have them? Call us first — we’ll help you plan.
🧱 Concrete
  • 4" minimum reinforced slab (6" preferred for production bays)
  • 6" preferred for production bays
  • Must be fully cured before anchor installation
⚡ Power
  • 110V, 30-amp breaker required
  • Have an electrician run a drop to the bay before install day
📐 Ceiling
  • Plan for 85" (7' 1") overall column height
  • Floor width 104" (8' 8") w/o motor
  • Measure to lowest obstruction, not peak
🔨 Alamo Installs Every Lift We Sell
We show up, anchor it, wire it, and hand you the keys. One number. One invoice. No coordinating contractors, no guessing if it’s done right.
📞 (844) 480-6059
Talk to Alamo’s install team

Atlas® APEX 8,000 lb 4-Post Lift & RJ35 Combo #ATEATTD-APEX8-COMBO-FPD

A manufacturer claiming "ALI Certified" on a listing is one thing; verifying that claim independently before you buy is another. Too many buyers find out after the sale that a certification claim doesn't hold up under scrutiny. The Atlas® APEX8 Combo gives you a genuinely ALI-certified 8,000 lb 4-post lift — confirmed on the standalone lift's own product page, not just repeated from this combo's marketing copy — paired with two RJ35 sliding jacks for wheel-free service capability in one purchase.

The lift runs on standard 110V power with a 30-amp breaker. Note that while the APEX8 lift itself carries ALI certification, the bundled RJ35 jacks do not — Atlas®'s own product listing is explicit about this distinction. Each jack ships with its own truck adapter set. Call Alamo at (844) 480-6059 to confirm your bay before you order.

Who the APEX8 Combo Is Built For

  • ✅ A homeowner whose insurance agent or HOA specifically asked about lift certification before approving a garage installation — this is the box that gets checked
  • ✅ An enthusiast comparing the non-certified 408SL Combo and deciding the ALI certification premium is worth it for peace of mind on a lift they'll trust with a daily driver
  • ✅ A light commercial operator who wants documented third-party safety verification on the lift itself, even knowing the bundled RJ35 jacks don't carry that same certification
  • ✅ A buyer who's storing a vehicle they genuinely can't afford to have fall, and wants more than a manufacturer's word that the engineering has been independently checked
  • ✅ Someone stepping up from a standard, non-certified 4-post lift after reading enough lift-failure stories online to decide certification is worth the extra cost this time

What the APEX8 Combo Is NOT Built For

  • ❌ Buyers who also need the jacks to carry ALI certification — the RJ35 jacks bundled here are explicitly non-certified
  • ❌ Commercial shops needing more than 8,000 lb capacity — the APEX9 Combo steps up to 9,000 lbs
  • ❌ Budget-focused buyers who don't need certification — the standard 408SL Combo covers the same capacity at a lower price without the ALI premium

What Makes the APEX8 Combo Different

ALI Certified Lift

The APEX8 lift itself carries independent Automotive Lift Institute certification to ANSI/ALI safety standards — verified in Atlas®'s own product description as "ALI Certified APEX 8 lift."

Caster Kit With Polyurethane Wheels Included

The lift ships with a caster kit so it can be relocated within the shop without disassembly.

Steel Approach Ramps, Jack Tray & Drip Trays Included

Ramps, a steel jack storage tray, and drip trays ship standard with the combo.

Wheel Stops & Wheel Chocks Included

Additional accessories for consistent vehicle positioning ship with the combo.

RJ35 Sliding Jacks Included (Non-Certified)

Each RJ35 jack ships with its own truck adapter set for wheel-free brake and suspension work — Atlas®'s own listing notes these specific jacks are not separately ALI certified.

✅ Best For
  • ✅ Buyers whose insurance or HOA requires certified lifts
  • ✅ Enthusiasts trusting a daily driver to a lift they'll rely on
  • ✅ Anyone wanting independently verified engineering, not just a manufacturer's word
❌ Not Ideal For
  • ❌ Buyers needing the jacks ALI certified too — only the lift is
  • ❌ Commercial shops needing more than 8,000 lbs
  • ❌ Budget buyers who don't need certification — see the 408SL Combo

Buy the Combo vs. Buy Separately

Line Item Price
APEX8 4-Post Lift, ALI Certified (8,000 lbs) — standalone $5,699.00
RJ35 Sliding Jack — standalone (each) $1,149.00
2x RJ35 jacks if bought separately $2,298.00
Lift + 2 jacks bought separately, total $7,997.00
APEX 8,000 lb 4-Post Lift & RJ35 Combo — this listing $7,599.00

Buying the ALI-certified APEX8 lift and two RJ35 jacks separately runs $7,997.00 versus $7,599.00 for this combo — a savings of roughly $398.00, plus one purchase instead of two. Call (844) 480-6059 and we will confirm current pricing before you order.

Full Specifications — APEX8 Combo

APEX8 4-Post Lift Specifications (ALI Certified)

Model / Part Number ATEATTD-APEX8-COMBO-FPD
Brand Atlas® Automotive Equipment
UPC 810524028875
Country of Origin China
Capacity 8,000 lbs
Lifting Height, Top of Runway 72" (6')
Clearance Under Runways 67" (5' 7")
Height of Columns 85" (7' 1")
Overall Width 104" (8' 8") w/ motor 114" (9' 6")
Overall Length w/ Ramps 207 5/8" (17' 3 5/8")
Runway Length 169 1/2" (14' 1 1/2")
Runway Width 18 3/4"
Runway Thickness 4 1/3"
Width Between Runways 38" (33" w/ rail)
Outside Runway to Outside Runway 75 1/4" (6' 3 1/4")
Clearance Between Columns 94" (7' 10")
Length Between Columns 157 1/3" (13' 1 1/3")
Drive Thru 80 1/4" (6' 8 1/4")
Motor / Electrical 110V, 30-amp breaker required
Hydraulic Oil 3-5 gallons AW32 or AW46 (not included)
Shipping Weight 2,000 lbs
ALI Certification ALI Certified Lift (per Atlas®'s own combo product description)

RJ35 Sliding Jack Specifications (Non-Certified, each)

Model Atlas® RJ35 Sliding Jack (non-certified)
Capacity 3,500 lbs
Lower Extension Width (Between Runway) 20 1/2" to 47"
Top Width (Arms Retracted & Extended) 39 1/2" to 64 3/4"
Min. Pad Height Above Runway 3 1/2" (may vary by lift)
Lift Pad Height Above Arm 1 3/8"
Max Height Raised w/o Adapter 11"
Max Height Raised w/ Adapters 17 1/4"
Shipping Weight 350 lbs
Adapter Heights 2 each: 1 1/2", 5"
Arm Hole / Adapter Peg Size 1 1/2"

⚠️ Installation Requirements

  • Ceiling/lift height: Plan for 85" (7' 1") overall column height; measure to the lowest obstruction.
  • Electrical: 110V, 30-amp breaker required; consult an electrician for exact breaker sizing.
  • Concrete: 4" minimum reinforced slab (6" preferred for production bays); fully cured before anchoring.
  • Bay width: Confirm 104" (8' 8") w/o motor floor width clearance; measure before ordering.
  • Hydraulic oil: 3-5 gallons AW32 or AW46 (not included).
  • Installation: Alamo installs every lift we sell. Call (844) 480-6059 to schedule.

Atlas® Warranty — APEX8 Combo

Atlas® backs the APEX8 lift with a 5-year structural / 2-year hydraulic warranty (parts only), and the bundled RJ35 jacks under this combo's coverage. (The RJ35 jacks are not ALI certified — see the ALI note above; this does not affect warranty coverage.)

Component Coverage Term
Structural welds & frame (lift) 2 years
Hydraulic system (lift) 2 years
Power unit / electrical (lift) 1 year
Wear items — lift & jack (pads, hoses, seals) 90 days

Warranty service is coordinated through Alamo Equipment & Service — call (844) 480-6059 with any warranty question, and we handle it directly instead of routing you to a manufacturer hotline.

Coverage is subject to Atlas® warranty terms, conditions, and requirements.

Frequently Asked Questions — Atlas® APEX 8,000 lb 4-Post Lift & RJ35 Combo

Is the Atlas® APEX8 Combo ALI certified?

The APEX8 lift itself is ALI certified — verified both on the standalone lift's own product page and in this combo's own product description, which states "Combo package includes ALI Certified APEX 8 lift." The bundled RJ35 jacks are explicitly non-certified per the same source.

What does the Atlas® APEX8 Combo include?

The combo includes one ALI-certified APEX8 4-post lift (8,000 lb capacity) plus two RJ35 sliding jacks (3,500 lb capacity each, non-certified), with a caster kit, steel approach ramps, a jack tray, drip trays, wheel stops, wheel chocks, and truck adapter sets for each jack.

Can I buy the RJ35 jack separately instead of the combo?

Yes — the RJ35 sliding jack is available standalone from Alamo at $1,149.00 each. Buying the lift and jacks separately runs a bit more than this combo, so the combo is still the better value if you need both. Call (844) 480-6059 if you only need one component.

What's the warranty on the Atlas® APEX8 lift?

Atlas® backs the APEX8 lift with a 5-year structural / 2-year hydraulic warranty (parts only). Warranty service runs through Alamo — call (844) 480-6059.

Why Buy the APEX8 Combo from Alamo Equipment & Service?

  • We verify certification instead of just repeating the manufacturer's claim. We confirmed the APEX8's ALI certification independently on its own standalone product page, not just from this combo's marketing copy.
  • This combo is the only way to get RJ35 jacks from Alamo. The RJ35 sliding jack isn't sold standalone — this combo pairs it with a certified lift in one purchase.
  • We deliver and set it up. Our team sizes the APEX8 Combo to your bay and handles the physical install.
  • We help you pick the right unit. At 8,000 lbs lift capacity and $7,599.00, we'll confirm the APEX8 Combo genuinely matches your needs before you buy.
  • We ship it free. Delivered to your shop, no hidden freight fees.

A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.

Shipping Information:

Customers may pick up their lift at the nearest freight terminal at no additional cost.

You will need to provide your own trailer. Terminal staff will safely load the lift onto your trailer. The RECEIVER/CUSTOMER is solely responsible for properly securing the load for transport.

To schedule a pickup, contact us at info@alamoequipment.com or 
(844) 480-6059. Please include the lift model and your zip code so we can direct you to the appropriate terminal.

Atlas Warranty Information

  • 5-Year Structural Warranty
  • 2-Year Hydraulic-Power Warranty

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)