Atlas 14,000 lb 414 4-Post Lift & RJ8 Combo #ATEATTD-414-COMBO-FPD

Atlas® 414 4-Post Lift & RJ8 Combo #ATEATTD-414-COMBO-FPD

Servicing trucks, vans, and fleet vehicles on a standard 4-post lift without a rolling jack means every brake, suspension, or tire job requires a separate under-vehicle jack that may not fit your runway spacing. The Atlas® 414 Combo solves that with a 14,000 lb heavy-duty 4-post lift built extra tall, extra wide, and extra long, paired with two RJ8000 rolling bridge jacks sized to match.

The lift runs on 220V single-phase power with an air-operated single-point lock release, and both included RJ8000 jacks are air-over-hydraulic — your bay needs both an electrical drop and compressed shop air (85-115 PSI, external supply not included) before install day, plus a 6" reinforced concrete pad rated to 3,000 PSI. Truck adapter sets ship with each jack standard. Call Alamo at (844) 480-6059 to confirm your bay before you order.

Who the 414 Combo Is Built For

• ✅ A fleet shop that outgrew its 412 Combo's 12,000 lb ceiling the day a 3/4-ton dually or box truck rolled in and the tech had to turn the job away
• ✅ A shop doing regular brake and suspension work on Class 3-4 vehicles where an 8,000 lb jack bottoms out on rated capacity before the job is even halfway done
• ✅ An operation that already budgeted for a heavy-duty 4-post lift and realized adding RJ8000 jacks now costs less than retrofitting wheel-free capability onto the lift later
• ✅ A shop with 220V and compressed air already run to a bay that's sitting empty, ready to put both to work on a single combined purchase instead of running two separate installs
• ✅ A commercial operation replacing an aging 4-post platform that wants heavier capacity and matched rolling jacks delivered and installed as one project instead of two

What the 414 Combo Is NOT Built For

• ❌ Shops without an existing compressed-air system — both the lock release and jacks require external shop air, not included
• ❌ Shops needing alignment turntables and slip plates — the 414 is a standard storage/service lift (see the 414A combo for alignment work)
• ❌ Lighter-duty shops that don't need 14,000 lb capacity — the 412 Combo covers 12,000 lbs at a lower price point

What Makes the 414 Combo Different

Extra Tall, Extra Wide, Extra Long Platform

The 414 lift is built with extended runway length, width, and column height for larger trucks, vans, and fleet vehicles.

Diamond-Plated Runways

Textured diamond-plate decking improves traction when driving vehicles on and off the lift.

Air-Operated Single-Point Lock Release

One release point drops all four column locks with shop air (external air supply required, not included).

Steel Approach Ramps Included

Ramps ship standard so vehicles can drive straight onto the runways.

Air-Over-Hydraulic RJ8000 Rolling Jacks

Both included RJ8000 jacks are air-over-hydraulic and rated to 8,000 lbs each, with a truck adapter set included per jack.

Full Specifications — 414 Combo

414 4-Post Lift Specifications

RJ8000 Rolling Bridge Jack Specifications (each)

Atlas® Warranty — 414 Combo

Atlas® backs the 414 lift with a 5-year structural / 2-year hydraulic warranty (parts only), and the bundled RJ8000 jacks under this combo's coverage.

Warranty service is coordinated through Alamo Equipment & Service — call (844) 480-6059 with any warranty question, and we handle it directly instead of routing you to a manufacturer hotline.

Coverage is subject to Atlas® warranty terms, conditions, and requirements.