Hofmann 15K 4-Post Align Lift – Extended (Lights & Locks) #EELR708LLPKG

Hofmann 15,000 lb 4-Post Alignment Lift — Extended, Lights & Locks

Longer wheelbase vehicles — extended-cab trucks, vans, and larger SUVs — are the ones most likely to hang off the end of a standard-length alignment runway, forcing your tech to eyeball slip-plate positioning or refuse the job outright. Add in a bay where the tech is climbing under the vehicle or crouching to read a locking pin in dim light, and every alignment on a bigger vehicle takes longer than it should.

The Hofmann EELR708LLPKG is built for exactly that combination. It's the extended-length version of Hofmann's 15,000 lb 4-post platform — 277" overall length versus 250.75" on the standard-length siblings — so long-wheelbase trucks and vans sit fully supported on the runway instead of overhanging it. Layer on the Lights & Locks package and your tech gets integrated LED lighting to see the working area clearly and a locking control system to secure the platform during under-vehicle work, without going out and sourcing a trouble light or aftermarket lock kit separately.

Who the EELR708LLPKG Is Built For

• Shops running a mixed fleet that regularly includes extended-cab trucks, cargo vans, or long-wheelbase SUVs that don't fully fit a standard 250.75" runway.
• Alignment bays where technicians spend real time under the vehicle and need integrated LED lighting instead of relying on a drop light or headlamp.
• Operations that want the locking control built in rather than adding a separate mechanical lock kit after the fact for platform security during service.
• Facilities with the 14' x 26' footprint to spare — this is the largest bay requirement in the 15K 4-post family, so confirm your extended-length clearance before ordering.
• Dealerships and fleet shops that want the Lights & Locks convenience bundled at purchase instead of budgeting a retrofit later.
• Commercial service operations doing routine alignment work on vehicles at the upper end of the wheelbase range where slip-plate accuracy depends on full runway support.

What the EELR708LLPKG Is NOT Built For

If your fleet is mostly standard-wheelbase passenger cars and light trucks, the extra 26.25" of runway length and the larger 14' x 26' bay requirement are more than you need — the standard-length EELR706APKG covers that work in a smaller footprint. And if you don't need the integrated lighting and locking package, the base extended EELR708APKG gets you the same runway length without paying for Lights & Locks.

What Makes the EELR708LLPKG Different

15,000 lb. Lifting Capacity

The EELR708LLPKG is rated to 15,000 lbs, which covers cars, SUVs, trucks, and fleet vehicles in one machine — including the heavier extended-cab and cargo van work this configuration is built to handle. You're not routing your heaviest vehicles to a second bay because the alignment rack tops out too low.

Extended Length Design

The 277" overall length gives long-wheelbase trucks, vans, and larger SUVs full runway support from end to end — no overhang, no guessing where the rear axle lands on the slip plate. That matters directly for alignment accuracy: a vehicle hanging off the runway edge can throw off toe and camber readings before the tech even starts adjusting.

Lights & Locks System

Integrated LED lighting puts light exactly where your tech is working underneath the vehicle, instead of relying on a shop drop light that gets left somewhere else. The locking control system secures the platform position during service, so there's no separate mechanical lock kit to source, install, and maintain after the fact.

Ultra-Wide 26-Inch Runways

Wide-track vehicles and dual-rear-wheel trucks need runway width that a standard-width alignment rack doesn't have. The 26-inch runways on the EELR708LLPKG give those vehicles stable footing without the tech having to carefully thread narrow tires onto an undersized platform.

Extra-Long 100-Inch Rear Slip Plates

The 100-inch rear slip plates give four-wheel alignment systems the full range of motion needed to capture accurate rear toe and thrust-angle readings on longer-wheelbase vehicles — the exact vehicle class this extended configuration is built around. Shorter slip plates can bind or limit travel on a long-wheelbase truck; these don't.

• ALI Certified Lift: Meets Automotive Lift Institute safety standards
• Imaging Alignment Compatible: Supports AC200 and AC400 clamp systems
• Micro-Adjustment Leveling: Helps improve alignment precision

Full Specifications 

Hofmann Warranty — EELR708LLPKG

Hofmann backs the EELR708LLPKG with the following coverage terms.

Warranty service is through Alamo Equipment & Service. When you buy from us, you're not waiting on a manufacturer's 800 number — you're calling us at (844) 480-6059 and we dispatch a tech. That's the difference between buying from a box shipper and buying from Alamo.