Hofmann 15K 4-Post Alignment Lift — Standard #EELR706APKG

SKU: ALMHOFEELR706APKG
Regular price $31,267.32
Regular price -24% $41,268.98 Sale price $31,267.32
In stock
Usually ships within 24 hours

Hofmann Shipping

Equipment: Free shipping
Parts: Standard tiered rate

ALI Certified Vehicle Lift
ALI/ETL Certified
The EELR706APKG is independently certified by the Automotive Lift Institute (ALI). ALI certification means this lift has been independently tested to meet ANSI/ALI ALCTV safety standards — the same standard OSHA references. Verify at autolift.org →
📚 Manuals & Resources
Need installation help? Call Alamo at (844) 480-6059 — we install, service, and inspect every lift we sell.
⚡ Quick Specs
Model / Part Number EELR706APKG
Brand Hofmann
Lifting Capacity 15,000 lbs | 6,804 kg
Overall Length 250.75" | 637 cm
Overall Width 142" | 361 cm
Max. Lifting Height 78" | 198 cm
Lifting Time 85 seconds
Power Supply 208-230V 60Hz 1Ph 30A 3HP / 2.2kW
Questions about power, air supply, or bay fit? Call (844) 480-6059 — Alamo's install team will walk you through requirements before you order.
🔧 Will the EELR706APKG Fit Your Bay?
Check your bay against the numbers below. If you clear them, you're good to go. Close on any of them? Call us and we'll confirm before you order.
MIN. BAY SIZE
14' x 24'
width x length
CAPACITY
15,000 lbs
rated lifting capacity
CONFIGURATION
Open Front, Standard
Base standard-length 15K 4-post configuration — no Lights & Locks or galvanized runway upgrade.
📞 Not sure if your bay clears? Call Alamo's install team at (844) 480-6059 and we'll walk through your measurements before you order.
🏗️ Site Prep — What Your Bay Needs Before Install Day
Have these ready and your install day goes smoothly. Don't have them yet? Call us first — we'll help you plan.
🛠 Concrete
  • 4" minimum reinforced slab
  • 6" preferred for production bays
  • Must be fully cured before anchor installation
⚡ Power
  • 208-230V 60Hz 1Ph 30A 3HP / 2.2kW
  • Have an electrician run a dedicated circuit to the bay before install day
💨 Air Supply
  • 90-120 PSI | 6-8 BAR
  • Confirm shop air line reaches the bay before install day
🔨 Alamo Installs Every Lift We Sell
We show up, anchor it, wire it, and hand you the keys. One number. One invoice. No coordinating contractors, no guessing if it's done right.
📞 (844) 480-6059
Talk to Alamo's install team

Hofmann 15,000 lb 4-Post Alignment Lift — Standard

Shops adding their first dedicated alignment lift, or replacing one that's finally worn out, usually don't need a fully-loaded package — they need a straightforward, certified 15,000 lb 4-post platform that handles the daily vehicle mix without a laundry list of add-ons driving up the price. Every extra option is one more thing to wire, maintain, and eventually service.

The Hofmann EELR706APKG is the base, standard-length configuration in this entire 15K 4-post lineup — 250.75" overall length, a 14' x 24' minimum bay, no Lights & Locks package, no galvanized runways. It's the entry point into Hofmann's 15,000 lb platform: full capacity, full ALI certification, and the core alignment-ready features (turntable pockets, integrated rear slip plates) without paying for upgrades most shops don't need on day one.

Who the EELR706APKG Is Built For

  • Shops buying their first dedicated 15,000 lb alignment lift that want full capacity without bundled upgrades driving up the price.
  • Operations with a standard-wheelbase vehicle mix that don't need the extended 277" runway the EELR708APKG offers.
  • Budget-conscious buyers replacing an aging alignment lift who want reliable core features over add-on packages.
  • Shops in a low-corrosion, climate-controlled environment where galvanized runways aren't worth the added cost.
  • Facilities that already have adequate bay lighting and don't need an integrated LED/locking system built into the lift.
  • Dealerships and tire centers standardizing on a dependable base-spec alignment platform across multiple bays.

What the EELR706APKG Is NOT Built For

If your fleet regularly includes extended-cab trucks or long-wheelbase vans, the 250.75" runway can leave them overhanging the platform — the extended EELR708APKG gives you 26.25" more runway in the same base configuration. If integrated LED lighting and locking hardware matter to your bay, the EELR706LLPKG covers the same footprint with Lights & Locks. And in salt-belt or high-moisture environments, the galvanized EELR706GPKG protects the runways against corrosion this base model doesn't address.

What Makes the EELR706APKG Different

15,000 lb. Lifting Capacity

Full 15,000 lb capacity covers cars, SUVs, trucks, vans, and fleet vehicles — the base configuration doesn't mean reduced capability, just fewer bundled extras. You get the same rated capacity as every other lift in this Hofmann 15K family.

Open-Front Configuration

With no crossmember blocking the front approach, your tech gets clear access to front suspension and steering components during camber and caster adjustments — improving workflow on every alignment job, not just specialty vehicles.

Ultra-Wide Runways

Wide-track vehicles and dual-rear-wheel trucks get stable footing on the ultra-wide runways instead of your tech carefully threading narrow tires onto an undersized platform — standard on this base model, not an upsell.

ALI Certified Lift

ALI certification means this lift has passed independent testing against ANSI/ALI ALCTV safety standards — the same benchmark OSHA references. That's documentation for your insurance carrier and a safety record your techs can rely on, standard on the base model just like every configuration in this lineup.

Heavy-Duty Hydraulic System

A dependable hydraulic system delivers consistent, level lifts cycle after cycle. On an alignment lift specifically, an uneven rise throws off camber and toe readings before your tech even starts adjusting — this is where reliability translates directly into alignment accuracy.

  • Premium Alignment Accessories: Includes turnplates and rollback kit
  • Low-Profile Drive-On Design: Simplifies loading of low-clearance vehicles
✅ Best For
  • Standard-length 4-post alignment lift applications
  • Shops needing 15,000 lbs certified alignment capacity
  • Facilities with at least 14' x 24' of bay space
⚠️ Not Ideal For
  • General repair bays without dedicated alignment volume
  • Shops with bay space below 14' x 24'

EELR706APKG vs. Atlas 14,000 lb 4-Post Alignment Lift w/ Turntables #ATEATTD-414AT-FPD — Which Fits Your Shop?

Feature EELR706APKG Atlas 14,000 lb 4-Post Alignment Lift w/ Turntables
Lift type Standard-length 4-post alignment lift 4-Post alignment lift w/ turntables
Capacity 15,000 lbs 14,000 lbs
Configuration Open Front, Standard 4-Post, 255" overall length w/ ramp
Warranty Hofmann (see Warranty tab) 5-year structural / 2-year hydraulic (parts only)
Best use case Standard-length 4-post alignment lift Nearby capacity class, both 4-post configuration

The right choice depends on your bay type and alignment volume — not just preference. Call (844) 480-6059 and we'll help you decide.

Full Specifications

Model / Part Number EELR706APKG
Brand Hofmann
Lifting Capacity 15,000 lbs | 6,804 kg
Overall Length 250.75" | 637 cm
Overall Width 142" | 361 cm
Max. Lifting Height 78" | 198 cm
Lifting Time 85 seconds
Power Supply 208-230V 60Hz 1Ph 30A 3HP / 2.2kW
Air Supply Required 90-120 PSI | 6-8 BAR
Minimum Recommended Bay Size (W x L) 14' x 24' | 427 x 732 cm

⚠️ Installation Requirements

  • Bay size: Minimum 14' x 24' recommended — confirm before ordering
  • Electrical: Confirm exact breaker sizing with a licensed electrician before install day
  • Concrete: Minimum 4" reinforced concrete slab; 6" preferred for production environments
  • Surface anchoring: Lift must be anchored per manufacturer specification — do not skip anchoring on production bays
  • Installation: Alamo installs every lift we sell. Call (844) 480-6059 to schedule.

Hofmann Warranty — EELR706APKG

Hofmann backs the EELR706APKG with the following coverage terms.

Component Coverage Term
Labor 1 year
Parts 1 year
Power Pack 18 months
Hydraulics 1 year

Warranty service is through Alamo Equipment & Service. When you buy from us, you're not waiting on a manufacturer's 800 number — you're calling us at (844) 480-6059 and we dispatch a tech. That's the difference between buying from a box shipper and buying from Alamo.

Frequently Asked Questions — EELR706APKG

What bay size do I need for the EELR706APKG?

Plan for a minimum bay of 14' x 24'. Base standard-length 15K 4-post configuration — no Lights & Locks or galvanized runway upgrade. Call Alamo at (844) 480-6059 and we'll confirm your measurements before you order.

Is the EELR706APKG ALI certified?

Yes — this model is ALI certified in accordance with the Automotive Lift Institute's ETL Certification Program.

What's the lifting capacity of the EELR706APKG?

15,000 lbs.

What's included with the EELR706APKG?

The EELR706APKG ships with turnplates and a rollback kit included as standard, plus the ultra-wide runways and low-profile drive-on design built in. It does not include the Lights & Locks package or galvanized runways — those are separate configurations. Call Alamo at (844) 480-6059 to confirm exactly what's in your order.

Why Buy the EELR706APKG from Alamo Equipment & Service?

  • We install it. A base-configuration 4-post lift is still a precision anchoring job — our team levels and secures it correctly so your alignment readings are accurate from the first vehicle.
  • We service it. When something needs attention after the install, we're the same people you call. Not a national warranty line.
  • We size it with you. 15,000 lbs capacity, 14' x 24' minimum bay — we'll confirm it fits before you buy.
  • Free shipping. Delivered to your shop, no hidden freight fees.
  • Expert comparison help. Not sure if this is the right fit vs. the Atlas 14,000 lb 4-Post Alignment Lift w/ Turntables #ATEATTD-414AT-FPD? Call (844) 480-6059 — we'll walk you through it.

A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.

Customers may pick up their lift at the nearest freight terminal at no additional cost.

You will need to provide your own trailer. Terminal staff will safely load the lift onto your trailer. The RECEIVER/CUSTOMER is solely responsible for properly securing the load for transport.

To schedule a pickup, contact us at info@alamoequipment.com or 
(844) 480-6059. Please include the lift model and your zip code so we can direct you to the appropriate terminal.

Hofmann equipment Warranty Policy - Hofmann USA products carry the following warranties:

HOFMANN WHEEL BALANCERS

  • LABOR 6 MONTHS
  • PARTS 1 YEAR
  • ELECTRONIC CIRCUIT BOARD 3 YEARS
  • ELECTRIC MOTOR 5 YEARS

HOFMANN WHEEL ALIGNERS

  • LABOR - 6 MONTHS
  • CIRCUIT BOARDS, PC’S, CRT & LCD - 3 YEARS
  • PARTS & PRINTER - 1 YEAR

Hofmann Equipment Warranty Policy - Hofmann USA products carry the following warranties:

HOFMANN BRAKE LATHES

  • LABOR - 6 MONTHS
  • PARTS - 2 YEARS
  • ELECTRIC MOTOR - 1 YEAR

HOFMANN TIRE CHANGERS

  • LABOR - 6 MONTHS
  • PARTS - 1 YEAR
  • ELECTRIC MOTOR - 3 YEARS
  • AIR MOTOR - 1 YEAR
  • TRANSMISSION - 3 YEARS

Hofmann Equipment Warranty Policy - Hofmann USA products carry the following warranties:

HOFMANN LIFTS

  • LABOR - 1 YEAR
  • PARTS - 1 YEAR
  • POWER PACK - 18 MONTHS (1 YEAR SCISSOR ALIGNMENT)
  • HYDRAULICS - 1 YEAR

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)