Hofmann 15K 4-Post Align Lift – Standard (Lights & Locks) #EELR706LLPKG

SKU: ALMHOFEELR706LLPKG
Regular price $34,551.84
Regular price -24% $45,604.14 Sale price $34,551.84
In stock
Usually ships within 24 hours

Hofmann Shipping

Equipment: Free shipping
Parts: Standard tiered rate

ALI Certified Vehicle Lift
ALI/ETL Certified
The EELR706LLPKG is independently certified by the Automotive Lift Institute (ALI). ALI certification means this lift has been independently tested to meet ANSI/ALI ALCTV safety standards — the same standard OSHA references. Verify at autolift.org →
📚 Manuals & Resources
Need installation help? Call Alamo at (844) 480-6059 — we install, service, and inspect every lift we sell.
⚡ Quick Specs
Model / Part Number EELR706LLPKG
Brand Hofmann
Lifting Capacity 15,000 lbs | 6,804 kg
Configuration Open Front, Standard
Lifting Time 85 seconds
Max. Lifting Height 78" | 198cm
Overall Height 99" | 251cm
Overall Length (Standard) 250.75" | 6370mm
Questions about power, air supply, or bay fit? Call (844) 480-6059 — Alamo's install team will walk you through requirements before you order.
🔧 Will the EELR706LLPKG Fit Your Bay?
Check your bay against the numbers below. If you clear them, you're good to go. Close on any of them? Call us and we'll confirm before you order.
MIN. BAY SIZE
14' x 24'
width x length
CAPACITY
15,000 lbs
rated lifting capacity
CONFIGURATION
Open Front, Standard
Standard-length footprint with the Lights & Locks upgrade — most compact 15K 4-post option in this batch.
📞 Not sure if your bay clears? Call Alamo's install team at (844) 480-6059 and we'll walk through your measurements before you order.
🏗️ Site Prep — What Your Bay Needs Before Install Day
Have these ready and your install day goes smoothly. Don't have them yet? Call us first — we'll help you plan.
🛠 Concrete
  • 4" minimum reinforced slab
  • 6" preferred for production bays
  • Must be fully cured before anchor installation
⚡ Power
  • 208-230V 60Hz 1Ph 30A 3HP / 2.2kW
  • Have an electrician run a dedicated circuit to the bay before install day
💨 Air Supply
  • 90-120 PSI | 6-8 BAR
  • Confirm shop air line reaches the bay before install day
🔨 Alamo Installs Every Lift We Sell
We show up, anchor it, wire it, and hand you the keys. One number. One invoice. No coordinating contractors, no guessing if it's done right.
📞 (844) 480-6059
Talk to Alamo's install team

Hofmann 15,000 lb 4-Post Alignment Lift — Standard, Lights & Locks

Not every shop has 26 feet of bay length to dedicate to an alignment rack — and dropping a lift you don't have room for into a bay that's already tight just creates a new clearance problem instead of solving your old one. Shops squeezed for space still need full 15,000 lb capacity and the visibility to work safely under the vehicle; they just can't spare the footprint an extended-length platform demands.

The Hofmann EELR706LLPKG is the standard-length version of Hofmann's 15,000 lb 4-post platform — 250.75" overall length and a 14' x 24' minimum bay, the most compact footprint in this entire 15K lineup, versus 277" and 14' x 26' on the extended siblings. You still get the full Lights & Locks package: integrated LED lighting so your tech can see the working area clearly, and a locking control system to secure the platform during service, without paying for or fitting the extra runway length most shops don't need.

Who the EELR706LLPKG Is Built For

  • Shops with a tighter bay — 14' x 24' available — that can't spare the extra 2 feet of length the extended-configuration EELR708LLPKG requires.
  • Operations whose daily vehicle mix is mostly standard-wheelbase passenger cars, SUVs, and light trucks rather than extended-cab or long-wheelbase fleet vehicles.
  • Alignment bays where technicians need integrated LED lighting for under-vehicle work without a separate drop light or headlamp.
  • Shops that want the locking control system built in for platform security instead of retrofitting a mechanical lock kit later.
  • Dealerships and tire centers upgrading from a bare-bones 4-post lift that want the Lights & Locks convenience without paying for extended-length runway they won't use.
  • Facilities running high alignment volume where the smaller footprint frees up floor space for a second bay function or walk-around clearance.

What the EELR706LLPKG Is NOT Built For

If your shop regularly services extended-cab trucks, cargo vans, or other long-wheelbase vehicles, the 250.75" runway can leave them overhanging the platform — the extended EELR708LLPKG gives you the same Lights & Locks package with 26.25" more runway length. And if you don't need the integrated lighting or locking hardware, the base standard EELR706APKG covers the same footprint at a lower price point.

What Makes the EELR706LLPKG Different

15,000 lb. Lifting Capacity

The EELR706LLPKG holds the same 15,000 lb rating as its extended sibling, so shrinking the footprint doesn't mean giving up capacity — cars, SUVs, trucks, vans, and fleet vehicles are all covered on a lift that fits your smaller bay.

Lights & Locks System

Integrated LED lighting puts light directly on the alignment plate area your tech is working under, and the alignment plate locking system holds position securely during service — both included standard rather than sourced as separate add-ons. On a compact-footprint lift where every inch of workspace counts, having the lighting built into the structure instead of a standalone drop light matters even more.

Ultra-Wide Runways

Even in the standard-length configuration, the wide runways give dual-rear-wheel trucks and wide-track vehicles stable footing without your tech having to carefully align narrow tires onto an undersized platform — the shorter footprint doesn't come at the cost of runway width.

ALI Certified Lift

ALI certification means the EELR706LLPKG has passed independent testing against ANSI/ALI ALCTV safety standards — the same benchmark OSHA references. That's documentation you can show your insurance carrier and a safety record your techs can rely on every time they load a vehicle.

Heavy-Duty Hydraulic System

A dependable hydraulic system means consistent, level lifts cycle after cycle — critical on an alignment lift where an uneven rise directly throws off your camber and toe readings before the tech even starts adjusting.

  • Premium Alignment Accessories: Includes turnplates and rollback kit
  • Low-Profile Drive-On Design: Simplifies loading of low-clearance vehicles
✅ Best For
  • Standard-length 4-post alignment lift with Lights & Locks applications
  • Shops needing 15,000 lbs certified alignment capacity
  • Facilities with at least 14' x 24' of bay space
⚠️ Not Ideal For
  • General repair bays without dedicated alignment volume
  • Shops with bay space below 14' x 24'

EELR706LLPKG vs. Atlas 14,000 lb 4-Post Alignment Lift w/ Turntables #ATEATTD-414AT-FPD — Which Fits Your Shop?

Feature EELR706LLPKG Atlas 14,000 lb 4-Post Alignment Lift w/ Turntables
Lift type Standard-length 4-post alignment lift with Lights & Locks 4-Post alignment lift w/ turntables
Capacity 15,000 lbs 14,000 lbs
Configuration Open Front, Standard 4-Post, 255" overall length w/ ramp
Warranty Hofmann (see Warranty tab) 5-year structural / 2-year hydraulic (parts only)
Best use case Standard-length 4-post alignment lift with Lights & Locks Nearby capacity class, both 4-post configuration

The right choice depends on your bay type and alignment volume — not just preference. Call (844) 480-6059 and we'll help you decide.

Full Specifications

Model / Part Number EELR706LLPKG
Brand Hofmann
Lifting Capacity 15,000 lbs | 6,804 kg
Configuration Open Front, Standard
Lifting Time 85 seconds
Max. Lifting Height 78" | 198cm
Overall Height 99" | 251cm
Overall Length (Standard) 250.75" | 6370mm
Overall Length (Extended) 277" | 7036mm
Minimum Recommended Bay Size, Standard (W x L) 14' x 24' | 427 x 732 cm
Shipping Weight 4,350 lbs | 1,973 kg
Air Supply Required 90-120 PSI | 6-8 BAR
Power Supply 208-230V 60Hz 1Ph 30A 3HP / 2.2kW

⚠️ Installation Requirements

  • Bay size: Minimum 14' x 24' recommended — confirm before ordering
  • Electrical: Confirm exact breaker sizing with a licensed electrician before install day
  • Concrete: Minimum 4" reinforced concrete slab; 6" preferred for production environments
  • Surface anchoring: Lift must be anchored per manufacturer specification — do not skip anchoring on production bays
  • Installation: Alamo installs every lift we sell. Call (844) 480-6059 to schedule.

Hofmann Warranty — EELR706LLPKG

Hofmann backs the EELR706LLPKG with the following coverage terms.

Component Coverage Term
Labor 1 year
Parts 1 year
Power Pack 18 months
Hydraulics 1 year

Warranty service is through Alamo Equipment & Service. When you buy from us, you're not waiting on a manufacturer's 800 number — you're calling us at (844) 480-6059 and we dispatch a tech. That's the difference between buying from a box shipper and buying from Alamo.

Frequently Asked Questions — EELR706LLPKG

What bay size do I need for the EELR706LLPKG?

Plan for a minimum bay of 14' x 24'. Standard-length footprint with the Lights & Locks upgrade — most compact 15K 4-post option in this batch. Call Alamo at (844) 480-6059 and we'll confirm your measurements before you order.

Is the EELR706LLPKG ALI certified?

Yes — this model is ALI certified in accordance with the Automotive Lift Institute's ETL Certification Program.

What's the lifting capacity of the EELR706LLPKG?

15,000 lbs.

What's included with the EELR706LLPKG?

The EELR706LLPKG ships with its Lights & Locks system, ultra-wide runways, turnplates, and rollback kit already included — you don't need to source those separately. Call Alamo at (844) 480-6059 to confirm exactly what's in your configuration before you order.

Why Buy the EELR706LLPKG from Alamo Equipment & Service?

  • We install it. The standard-length footprint fits a tighter bay, but wiring the Lights & Locks system and anchoring the platform correctly still takes an experienced crew — our team handles both in one visit.
  • We service it. When something needs attention after the install, we're the same people you call. Not a national warranty line.
  • We size it with you. 15,000 lbs capacity, 14' x 24' minimum bay — we'll confirm it fits before you buy.
  • Free shipping. Delivered to your shop, no hidden freight fees.
  • Expert comparison help. Not sure if this is the right fit vs. the Atlas 14,000 lb 4-Post Alignment Lift w/ Turntables #ATEATTD-414AT-FPD? Call (844) 480-6059 — we'll walk you through it.

A shop buying from a pure e-commerce retailer gets a box. A shop buying from Alamo gets a partner.

Customers may pick up their lift at the nearest freight terminal at no additional cost.

You will need to provide your own trailer. Terminal staff will safely load the lift onto your trailer. The RECEIVER/CUSTOMER is solely responsible for properly securing the load for transport.

To schedule a pickup, contact us at info@alamoequipment.com or 
(844) 480-6059. Please include the lift model and your zip code so we can direct you to the appropriate terminal.

Hofmann equipment Warranty Policy - Hofmann USA products carry the following warranties:

HOFMANN WHEEL BALANCERS

  • LABOR 6 MONTHS
  • PARTS 1 YEAR
  • ELECTRONIC CIRCUIT BOARD 3 YEARS
  • ELECTRIC MOTOR 5 YEARS

HOFMANN WHEEL ALIGNERS

  • LABOR - 6 MONTHS
  • CIRCUIT BOARDS, PC’S, CRT & LCD - 3 YEARS
  • PARTS & PRINTER - 1 YEAR

Hofmann Equipment Warranty Policy - Hofmann USA products carry the following warranties:

HOFMANN BRAKE LATHES

  • LABOR - 6 MONTHS
  • PARTS - 2 YEARS
  • ELECTRIC MOTOR - 1 YEAR

HOFMANN TIRE CHANGERS

  • LABOR - 6 MONTHS
  • PARTS - 1 YEAR
  • ELECTRIC MOTOR - 3 YEARS
  • AIR MOTOR - 1 YEAR
  • TRANSMISSION - 3 YEARS

Hofmann Equipment Warranty Policy - Hofmann USA products carry the following warranties:

HOFMANN LIFTS

  • LABOR - 1 YEAR
  • PARTS - 1 YEAR
  • POWER PACK - 18 MONTHS (1 YEAR SCISSOR ALIGNMENT)
  • HYDRAULICS - 1 YEAR

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)