Hofmann 15K 4-Post Alignment Lift – Standard, Galvanized #EELR706GPKG

Hofmann 15,000 lb 4-Post Alignment Lift — Standard, Galvanized

Shops with a tighter alignment bay often face a tradeoff: fit a smaller lift and settle for reduced capacity, or squeeze an oversized platform into a footprint it wasn't sized for. Add road salt or moisture into the mix and standard steel runways start corroding years before the rest of the lift is worn out — a maintenance problem most shops don't think about until it's already visible.

The Hofmann EELR706GPKG solves both at once. It's the standard-length version of Hofmann's 15,000 lb 4-post platform — 250.75" overall length and a 14' x 24' minimum bay, the most compact footprint in this entire 15K lineup — built with galvanized runway construction instead of standard painted steel. You get full 15,000 lb capacity in a smaller footprint, with corrosion-resistant runways that hold up against road salt and moisture without the surface rust that shows up on unprotected steel over time.

Who the EELR706GPKG Is Built For

• Shops with a tighter bay — 14' x 24' available — that don't need the extra 2 feet of runway the extended-configuration EELR708GPKG requires.
• Operations in salt-belt or coastal regions where winter road salt and moisture accelerate corrosion on standard steel runways.
• Facilities that wash vehicles in-bay or deal with routine standing moisture where exposed steel would otherwise corrode.
• Shops whose daily vehicle mix is mostly standard-wheelbase passenger cars and light trucks rather than extended-cab or long-wheelbase fleet vehicles.
• Buyers who want galvanized durability as the primary upgrade rather than paying for integrated lighting or locking hardware.
• Dealerships and alignment centers planning for a longer equipment lifecycle who want to minimize runway maintenance and repainting.

What the EELR706GPKG Is NOT Built For

If your fleet regularly includes extended-cab trucks or long-wheelbase vans, the 250.75" runway can leave them overhanging the platform — the extended EELR708GPKG gives you the same galvanized durability with 26.25" more runway length. And if integrated LED lighting and a locking control system matter more than corrosion resistance, the EELR706LLPKG covers the same standard footprint with Lights & Locks instead.

What Makes the EELR706GPKG Different

15,000 lb. Lifting Capacity

The compact footprint doesn't cost you capacity — the EELR706GPKG is rated the same 15,000 lbs as its extended sibling, covering passenger vehicles, SUVs, vans, and light commercial trucks in the smallest bay this 15K lineup requires.

Galvanized Runways

The corrosion-resistant runway finish means the surface most exposed to road salt, brake dust, and standing moisture is also the most protected part of the lift. Instead of budgeting for runway repainting or replacement a few years down the line, the galvanized finish is built to hold up under those conditions from day one.

Open Front Alignment Design

An unobstructed front approach means your tech has clear access to front suspension and steering components during camber and caster adjustments — no crossmember to work around on vehicles with tight front-end geometry.

Integrated Rear Slip Plates

Built-in rear slip plates let the rear wheels settle into natural position during alignment instead of binding against a fixed surface, improving the accuracy of toe and thrust-angle readings on every vehicle that comes through the bay.

Turntable Pocket Compatibility

Pre-built turntable pockets mean your alignment console's front turntables install without field-modifying the runway — a cleaner setup on install day and a more accurate reading on steering angle once the console is running.

• Runway Jack Compatibility: Supports optional bridge jack systems for wheel service
• Ideal for High-Volume Facilities: Suitable for dealerships and alignment centers

Full Specifications

Hofmann Warranty — EELR706GPKG

Hofmann backs the EELR706GPKG with the following coverage terms.

Warranty service is through Alamo Equipment & Service. When you buy from us, you're not waiting on a manufacturer's 800 number — you're calling us at (844) 480-6059 and we dispatch a tech. That's the difference between buying from a box shipper and buying from Alamo.