Hofmann 18K 4-Post Alignment Lift #FPA18210PKGA

Hofmann 18,000 lb 4-Post Alignment Lift

Medium-duty trucks, heavy vans, and larger commercial vehicles are exactly the vehicles most 15,000 lb alignment lifts can't safely handle — pushing a heavier vehicle onto a lift rated below its actual weight isn't just risky, it can also throw off the alignment console's own tolerances. Shops that regularly service this heavier end of the vehicle spectrum need dedicated capacity headroom, not a lift they're constantly running near its rated limit.

The Hofmann FPA18210PKGA is the highest-capacity lift in this entire batch — 18,000 lbs, 3,000 lbs more than every 15K 4-post configuration here — with a closed-front design that adds structural stability for the heavier loads this lift is built to handle. At 305" overall length, it's also the largest footprint in the lineup, built specifically for shops whose vehicle mix regularly exceeds what a 15,000 lb platform is rated for.

Who the FPA18210PKGA Is Built For

• Shops that regularly service medium-duty trucks, cargo vans, and commercial vehicles at or near the 15,000 lb limit of standard 4-post lifts, and need real capacity headroom.
• Fleet operations running heavier vehicle classes where undersized lift capacity is both a safety risk and a productivity bottleneck.
• Facilities with the largest bay footprint in this batch available — approximately 26' x 20' — to accommodate the 305" closed-front platform.
• Shops that want the structural stability of a closed-front design specifically because they're lifting toward the top of the weight range this equipment class supports.
• Dealerships and commercial service centers standardizing on one high-capacity lift instead of routing heavier vehicles between multiple lower-rated lifts.
• Operations planning for future fleet growth into heavier vehicle classes who want capacity headroom built in now rather than upgrading again later.

What the FPA18210PKGA Is NOT Built For

If your daily vehicle mix is passenger cars, SUVs, and light trucks, the 18,000 lb capacity and 305" footprint are more lift and more bay space than you need — any of the 15,000 lb configurations in the Hofmann 4-post lineup, like the standard EELR706APKG, covers that work in a smaller footprint at a lower price point. And if floor space is at a premium, the flush-mount scissor EELR724APKG installs level with the floor instead of adding a large above-grade structure.

What Makes the FPA18210PKGA Different

18,000 lb. Lifting Capacity

At 18,000 lbs, this is the highest rated capacity in the entire Hofmann alignment lineup — 3,000 lbs above the 15,000 lb 4-post family. That headroom means medium-duty trucks, heavy vans, and larger fleet vehicles get lifted well within rated limits instead of pushing a standard alignment lift to its ceiling on every heavy vehicle.

Closed-Front Configuration

The closed-front design adds structural rigidity across the front of the platform, which matters directly at this weight class — heavier vehicles put more stress on the lift structure, and the closed-front configuration is built to handle that load without the flex an open-front design might see at 18,000 lbs.

ALI Certified Lift

ALI certification means the FPA18210PKGA has passed independent testing against ANSI/ALI ALCTV safety standards — the same benchmark OSHA references — at its full 18,000 lb rating. That's documentation for your insurance carrier and a safety record your techs can trust when lifting the heaviest vehicles in your fleet.

Form-Integrated Deck & Jack Rail

An integrated deck and jack rail design reduces vibration during alignment procedures — critical at this capacity class, where a heavier vehicle on an unstable platform can throw off the precision your alignment console depends on for accurate camber, caster, and toe readings.

Long Pro-Style Runways

At 305" overall length, the extended runways accommodate the long-wheelbase medium-duty trucks and commercial vehicles this lift is built for — vehicles that would overhang even the extended-length 15,000 lb configurations in this batch.

• Front Cross Beam Reinforcement: Improves overall structural stability
• Built-In Anti-Sway System: Improves lift stability during operation
• Premium Alignment Accessories Included: Includes turnplates and rollback kit

Full Specifications

Hofmann Warranty — FPA18210PKGA

Hofmann backs the FPA18210PKGA with the following coverage terms.

Warranty service is through Alamo Equipment & Service. When you buy from us, you're not waiting on a manufacturer's 800 number — you're calling us at (844) 480-6059 and we dispatch a tech. That's the difference between buying from a box shipper and buying from Alamo.