APlusLift 10,000LB 2-Post Overhead Symmetrical, Asymmetrical Single Release Car Lift #HW-10ASY
Couldn't load pickup availability
Quick Specs
| Model / Part Number | HW-10ASY |
| Capacity | 10,000 lbs |
| Lift Type | Overhead symmetric/asymmetric 2-post lift |
| Lock Release | Single-point release |
| Overall Height | 141 3/16" |
| Overall Width | 139 1/8" standard / 140 15/32" post rotated |
| Drive-Thru Clearance | 104" symmetric / 97" asymmetric |
| Column-to-Column Width | 113" symmetric / 107" asymmetric |
| Max Lift Height | 81" with adapters / 75" without adapters |
| Arm Configuration | Combo symmetric/asymmetric arms |
| Motor / Electrical | 220V, 1-phase, 3 HP, 30A breaker recommended |
| Rise Time | About 50 seconds |
| Included Adapters | 4" truck adapters, adjustable pads, anchors, shims, tool trays, toe guards |
| Concrete Requirement | 6" thick, 3500 PSI reinforced concrete; 4" allowed for vehicles 9,000 lbs and below per source |
| Shipping Weight | 1,470 lbs plus 120 lb extension crate |
| Warranty | 3 years / 36 months |
| Installation | Available - call (817) 865-3707 |
The APlusLift HW-10ASY is a 10,000 lb overhead 2-post lift for buyers who want the flexibility to install and use the lift in symmetric or asymmetric layouts.
It combines single-point release, 50-second listed rise time, combo arm arrangement, included 4 inch truck adapters, and a lower price point than premium certified 10K alternatives.
Symmetric or Asymmetric Setup
The HW-10ASY can be installed with columns facing each other or rotated for asymmetric use, giving shops more layout flexibility.
10K Overhead Package
The 10,000 lb overhead design keeps the center bay open for carts, jacks, and technician movement.
Combo Arm Arrangement
3-stage front arms and 2-stage rear arms support a range of pickup points across cars, SUVs, and light trucks.
Included Accessories
The source lists adjustable screw pads, 4 inch truck adapters, anchors, shims, tool trays, and toe guards.
Value-Focused Alternative
This is a budget-friendly internal option compared with premium certified 10K lifts.
Frequently Asked Questions
What is the lifting capacity of the HW-10ASY?
The HW-10ASY is rated for 10,000 lbs, assuming the lift is installed correctly and the vehicle is positioned within the lift rating.
Is the HW-10ASY ALI certified?
The current Alamo source page does not support an ALI certification claim for this model.
What type of 2-post lift is the HW-10ASY?
Overhead symmetric/asymmetric 2-post lift
What electrical service does the HW-10ASY need?
220V, 1-phase, 3 HP, 30A breaker recommended
What concrete does the HW-10ASY require?
6" thick, 3500 PSI reinforced concrete; 4" allowed for vehicles 9,000 lbs and below per source
Does the HW-10ASY include adapters?
4" truck adapters, adjustable pads, anchors, shims, tool trays, toe guards
Can Alamo install the HW-10ASY?
Yes. Alamo Equipment & Service can help with bay planning, installation, annual inspections, repair, and long-term service support. Call (817) 865-3707 to discuss the bay.
How does the HW-10ASY compare to the Challenger CL10AV3?
Choose the HW-10ASY when price and symmetric/asymmetric layout flexibility are the priorities. Choose the Challenger CL10AV3 when ALI/ETL certification, Challenger support, QuickCycle controls, and premium Versymmetric arm design are required.
Best For
✓ Buyers who want a lower-price 10K overhead lift
✓ Shops choosing between symmetric and asymmetric installation
✓ Mixed car, SUV, and light-truck bays that need included truck adapters
✓ Facilities with enough height for a 141 3/16 inch overhead lift
✗ Not ideal when documented ALI certification is required
✗ Not ideal for vehicles above 10,000 lbs
✗ Not ideal for very low ceilings where a baseplate lift is a better fit
Installation Requirements
• Confirm 141 3/16" overall lift height plus vehicle and working clearance
• Choose symmetric or asymmetric column placement before anchoring
• Verify 6" thick, 3500 PSI reinforced concrete before installation
• Provide 220V single-phase power for the 3 HP motor; 30A breaker recommended
• Plan receiving for the 1,470 lb lift package and 120 lb extension crate
• Professional installation strongly recommended for commercial 2-post lifts
• Alamo offers installation planning and support - call (817) 865-3707
Why Buy This HW-10ASY From Alamo Equipment
✓ Alamo can help decide whether the HW-10ASY should be installed symmetric or asymmetric for the buyer's bay
✓ The 10,000 lb capacity, 141 3/16 inch height, and included adapters make this a practical value package for mixed light-duty service
✓ Alamo can compare the HW-10ASY against premium internal 10K options like Challenger CL10AV3
✓ Alamo can help buyers verify slab, electrical, height, width, delivery, and installation details before ordering
✓ Alamo supports buyers with installation planning, inspection, maintenance, repair, and replacement-part guidance
(817) 865-3707
HW-10ASY vs Challenger CL10AV3
Both products are sold by Alamo and serve nearby two-post lift use cases.
| Spec | HW-10ASY | Challenger CL10AV3 |
|---|---|---|
| Capacity | 10,000 lbs | 10,000 lbs |
| Positioning | APlusLift HW-10ASY 10K Symmetric/Asymmetric 2-Post Lift | Premium Challenger Versymmetric 10K lift |
| Certification | No ALI claim on current source | ALI / ETL certified |
| Bay Layout | Overhead symmetric/asymmetric 2-post lift | Overhead clearfloor |
| Overall Height | 141 3/16" | Premium 10K Challenger configuration |
| Drive-Thru Clearance | 104" symmetric / 97" asymmetric | See Challenger CL10AV3 product specs |
| Best Fit | Buyers who want a lower-price 10K overhead lift | Best when certification, Versymmetric arms, and QuickCycle support matter most |
Choose the HW-10ASY when price and symmetric/asymmetric layout flexibility are the priorities. Choose the Challenger CL10AV3 when ALI/ETL certification, Challenger support, QuickCycle controls, and premium Versymmetric arm design are required.
Shipping Information:
Customers may pick up their lift at the nearest freight terminal at no additional cost.
You will need to provide your own trailer. Terminal staff will safely load the lift onto your trailer. The RECEIVER/CUSTOMER is solely responsible for properly securing the load for transport.
To schedule a pickup, contact us at info@alamoequipment.com or
(817) 865-3707. Please include the lift model and your zip code so we can direct you to the appropriate terminal.
Warranty Information
- 3-Year Structural Components Warranty
- 1-year Parts Warranty