iDEAL Elec-Hydra Motorcycle Lift Bench #M-2200IEH-XR-BLK

Tuxedo M-2200IEH-XR-BLK — Electric/Hydraulic Motorcycle Lift Bench

The Tuxedo M-2200IEH-XR-BLK is a 2,200 lb capacity electric/hydraulic motorcycle lift bench with an integrated power unit and Tuxedo's exclusive full-width retractable ramp system. The 31.5-in wide, 88.6-in long platform is sized for motorcycles, raising to a maximum lift height of 47-1/4 in from a 7-in lowered height across six locking positions. Finished in Tuxedo's black powder coat for a distinct shop appearance; specs are identical to the standard-finish model.

A hand-held remote control pendant runs the 110V integrated electric/hydraulic power unit, and a magnetic lock release, rear drop-down service panel, stabilizer bar, wheel stops, and tie-down anchor eye bolts are built in. The platform is also designed to mount the optional M-VISE or M-CHOCK accessory. TRIKEKIT-2200IEH-XR trike accessory kit is available for this model.

Who It's Built For

• ✅ Power-sport shops and dealerships servicing motorcycles up to 2,200 lb
• ✅ Shops that want a retractable ramp for easy loading without a separate ramp accessory
• ✅ Facilities that want remote-pendant operation and six locking height positions for a range of service tasks

What It's NOT Built For

• ❌ Vehicles or loads exceeding 2,200 lb
• ❌ Vehicle classes outside the motorcycle platform sizing — see the sibling A/M/U-2200IEH-XR models for other power-sport vehicle classes

Questions about fit, freight, or capacity? Call Alamo at (817) 865-3707.

What Makes the M-2200IEH-XR-BLK Different

Exclusive Full-Width Retractable Ramp

Tuxedo's retractable ramp system extends for easy vehicle loading and retracts out of the way during service, without a separate ramp accessory to store.

31.5-in Platform Sized for Motorcycle

The 31.5" x 88.6" platform is sized specifically for motorcycle track/wheel widths — narrower than the U-2200IEH-XR's 65-in UTV platform and wider than the M-2200IEH-XR's 31.5-in motorcycle platform.

Six Locking Positions, 7 in to 47-1/4 in

Hand-held remote control raises and lowers the platform across six mechanical locking heights for a range of service tasks.

Integrated 110V Power Unit

Electric/hydraulic power unit is built into the lift — no separate hydraulic pump to plumb in.

Trike Kit Compatible

The optional TRIKEKIT-2200IEH-XR accessory kit is available for this model to adapt the bench for three-wheel motorcycles.

✅ Best For

• ✅ Shops servicing motorcycles up to 2,200 lb that want remote-pendant lift operation
• ✅ Facilities wanting an integrated ramp instead of a separate loading ramp

❌ Not Ideal For

• ❌ Vehicle classes sized for the sibling ATV or UTV platforms — see the A-2200IEH-XR or U-2200IEH-XR
• ❌ Loads over 2,200 lb

A-2200IEH-XR vs. M-2200IEH-XR vs. U-2200IEH-XR — Which Power Sport Platform Fits Your Vehicle?

All three share the same 2,200 lb capacity, integrated electric/hydraulic power unit, and exclusive retractable ramp — the difference is platform width, sized for each vehicle class.

Choose the model that matches the vehicle class you service most — the platform width is sized specifically for ATV, motorcycle, or UTV track widths. Call (817) 865-3707 to confirm which platform fits your typical vehicle mix.

Warranty — M-2200IEH-XR-BLK

Tuxedo Distributors, LLC backs the M-2200IEH-XR-BLK with a limited one-year warranty to the original purchaser, plus a five-year structural warranty on major structural components, covering parts found defective in materials or workmanship under normal use.

There is no other express warranty on Tuxedo lifts; this warranty is exclusive of and in lieu of all other warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose. Warranty service is coordinated through Alamo Equipment & Service — call (817) 865-3707 and we handle it.