iDEAL Air Electric Booth Heater - 30KW #RS-3001-EHS-30KW-3PH-230V

SKU: ALMTUXRS3001EHS30KW3PH230VFPD
Regular price $14,960.00
Available to order
📚 Manuals & Resources
Need installation help? Call Alamo at (817) 865-3707 — we install, service, and inspect every unit we sell.
✓ Freight Included: The advertised price includes standard freight delivery within the 48 contiguous United States. Additional freight charges apply for Alaska and Hawaii.
Quick Specs
Model / Part Number RS-3001-EHS-30KW-3PH-230V (RAMMSTEIN)
Type Electric Air Makeup Unit (AMU) Heater
Heating Element 30KW / 230VAC / 3-phase / 85A
Blower Motor 2 HP / 230VAC / 3-phase
Temperature Rise Approx. 30°F in 10 min / 50°F in 50 min
Ship Weight 560 lb
🔧 Will the RS-3001-EHS-30KW-3PH-230V Fit Your Bay?
Check your bay against these numbers. Close on any of them? Call us before you order.
Heating Element
30 KW
electric heat output
Ship Weight
560 lb
rigging/placement capacity needed
Blower Motor
2 HP
230VAC 3-phase
📞 Not sure if your bay clears? Call Alamo at (817) 865-3707 before you order. Standard freight within the contiguous 48 states is already included in the advertised price.
🏗 Site Prep — What Your Bay Needs Before It Arrives
Have these ready and setup goes smoothly. Uncertain about one? Call us first.
🧱 Floor / Concrete
  • Level, load-rated mounting location per the installation manual
  • Confirm structural support for a 560 lb unit at the mounting point
  • Indoor or booth-integrated mounting per manufacturer instructions
⚡ Electrical Service
  • 230VAC 3-phase service sized for a 30KW heating element (85A) and 2 HP blower motor
  • Have a licensed electrician confirm circuit sizing before delivery
  • No gas or LP supply required — electric heating element only
📐 Placement
  • Compatible with cross-flow, side-down, and semi-down-draft booth models
  • Confirm duct routing and clearance for the 560 lb unit
  • Ships via LTL freight
🔨 Alamo Sets Up Every Unit We Sell
We coordinate delivery, get it wired into your booth, and make sure it's running right. One number, one invoice.
📞 (817) 865-3707
Talk to Alamo's team

CPI / Rammstein Air Electric Booth Heater — RS-3001-EHS-30KW-3PH-230V

The RS-3001-EHS-30KW-3PH-230V is a 30KW electric air makeup unit (AMU) heater built to supply heated makeup air to a paint spray booth without a gas or LP line. It uses a 30KW electric heating element paired with a 2 HP blower motor, both running on 230VAC 3-phase power (85A on the heating element), and is rated to raise booth air temperature approximately 30°F in 10 minutes or 50°F in 50 minutes.

Compatible with cross-flow, side-down, and semi-down-draft paint booth configurations, this electric heater is the option for shops that don't have a natural gas or LP line run to the booth, or that prefer an all-electric heating system for their finishing operation.

It's built for collision centers and body shops running a booth on 230VAC 3-phase electrical service that want factory-supported electric heat without adding gas infrastructure.

Who It's Built For

  • ✅ Body shops running a booth on 230VAC 3-phase electrical service
  • ✅ Facilities without a gas or LP line to the paint booth
  • ✅ Cross-flow, side-down, or semi-down-draft booth configurations

What It's NOT Built For

  • ❌ Shops wanting the fastest possible temperature rise on large booths — the direct-fired RS-1001 (1.2M BTUH) heats faster on gas/LP
  • ❌ Facilities without 230VAC 3-phase electrical service available

Questions about fit, freight, or capacity? Call Alamo at (817) 865-3707.

What Makes the RS-3001-EHS-30KW-3PH-230V Different

30KW Electric Heating Element

A 30KW electric heating element rated 85A on 230VAC 3-phase power delivers an approximate 30°F temperature rise in 10 minutes, or 50°F in 50 minutes — no gas or LP line required.

2 HP Blower Motor

The blower motor is rated 2 HP on 230VAC 3-phase power, matched to the heating element for balanced airflow.

Deluxe Control Panel & VFD Technology

An ETL-listed deluxe control panel includes an hour meter, cycle/elapsed time displays, and interlock status indicator lights, with a factory-fused and wired VFD for exhaust airflow control.

Multi-Booth-Type Compatibility

Compatible with cross-flow, side-down, and semi-down-draft paint booth models.

Single-Point Connection

A 30 ft umbilical cord and single-point connection design simplify field wiring during installation.

✅ Best For

  • ✅ Booths on 230VAC 3-phase power without gas/LP infrastructure
  • ✅ Cross-flow, side-down, or semi-down-draft configurations
  • ✅ Shops standardizing on factory-supported iDEAL/CPI Rammstein Air equipment

❌ Not Ideal For

  • ❌ Very large booths needing the fastest possible temperature rise — consider the direct-fired RS-1001
  • ❌ Facilities without 230VAC 3-phase service

Full Specifications — RS-3001-EHS-30KW-3PH-230V

Model / Part Number RS-3001-EHS-30KW-3PH-230V (RAMMSTEIN)
Fuel Electric
Heating Element 30KW / 230VAC / 3-phase / 85A
Blower Motor 2 HP / 230VAC / 3-phase, 6.3A @ 208V
Temperature Rise Approx. 30°F in 10 minutes / 50°F in 50 minutes
PSB Model Usage Cross Flow, Side Down & Semi Down Draft
Ship Weight 560 lb
Control Panel ETL-listed deluxe panel, hour meter, interlock status lights
Connection Single-point connection, 30 ft umbilical cord
Finish White powder coat, inside and outside

⚠️ Installation Requirements

  • Electrical: 230VAC 3-phase service sized for the 30KW heating element (85A) and 2 HP blower motor; use a licensed electrician.
  • Mounting: Level, load-rated mounting location per the installation manual; confirm structural support for 560 lb.
  • Ducting: Confirm compatibility with your cross-flow, side-down, or semi-down-draft booth configuration before delivery.
  • Freight: Delivery within the contiguous 48 states is included in the advertised price.
  • Installation: Call Alamo at (817) 865-3707 to coordinate setup.

iDEAL Warranty — RS-3001-EHS-30KW-3PH-230V

The RS-3001-EHS-30KW is backed by the manufacturer's published Limited Warranty for California Pulse Inc. / Rammstein Air electric heating systems.

Component Coverage Term
Parts (workmanship / materials defects, normal use) 12 months from installation date, or 14 months from ship date — whichever comes first
On-site labor Not covered
Filters (consumable) Not covered
Damage from improper installation or alteration Not covered
Coverage validity Requires online product registration within 30 days of installation

Full terms are in the manufacturer's installation and maintenance manual, linked above.

Warranty service is coordinated through Alamo — call (817) 865-3707 for assistance rather than waiting on a manufacturer hotline.

❓ Frequently Asked Questions — RS-3001-EHS-30KW-3PH-230V

Does the RS-3001-EHS-30KW-3PH-230V price include shipping?

Yes. The advertised price includes delivery within the 48 contiguous United States. Additional freight charges apply for Alaska and Hawaii.

What electrical service does this heater need?

It runs on 230VAC 3-phase power: 85A for the 30KW heating element and a 2 HP blower motor.

How fast does it heat the booth?

Approximately 30°F in 10 minutes, or 50°F in 50 minutes, depending on booth size and conditions.

What booth types is this compatible with?

Cross-flow, side-down, and semi-down-draft paint booth models.

Why Buy the RS-3001-EHS-30KW-3PH-230V from Alamo Equipment & Service?

  • Freight is included. The advertised price includes delivery within the contiguous 48 states.
  • We coordinate delivery. Alamo helps confirm delivery details before shipment.
  • We help with setup. Alamo can help coordinate installation of your RS-3001-EHS-30KW-3PH-230V electric heater.
  • We service it. Questions after delivery? Call (817) 865-3707.

One clear delivered price for customers in the contiguous 48 states.

Shipping follows the method shown on the product page and at checkout. Standard parcel, calculated LTL, freight quotes, included freight, and pickup may apply by item.